Search results

Ive just done this in my bathroom and it lokks to be the same grey stuff. Only way i got it off from my chipboard was a angle grinder and concrete sanding disc. Went through it rather easily enough after trying ither methods such as multitool blades, sds with scraper blade. You will need a...

Gunk build up was my main concern. Or more ten years of missus Notadecor8ter's bodily fibres.

What about metal stud being drilled into for it

What about a charity abroad?

Is 32mm for waste suitable? I've had 40mm from original build installed that had horrible boxing, I'd prefer to whack this into 50mm Metal stud and out the wall with 32mm if I could. Or with metal stud is the integrity more impacted than wood?

Yes agree, it was put in before balancing the rads.

Ok, closed all of the rads except two not working, one worked and the other didn't, I suspect the one not working has a frozen TRV. I will have to replace that in a few weeks when the x400 I put in does its thing as I thought it might had been a blockage. Rads now back on. Thanks for the help.

I didnt realise you needed this for unvented. I loved in to a place with unvented i think knstalled by the previous owner who was a gas engineer. Could this cause aggro long term if going through a sale?

Ok so those being tightened has sorted that bit. I will be avoiding this one lol In the morning i will shut all possible off to work out if its balancing another issue going around is some of these wheel head valves are stuck as well.

Here you go not sure i see any nut or is that the brass section at the bottom.

I can't balance them because when im closing the lock shield valves on most of them they start leaking. 1. Pipes before the rads stone cold are not warm 2. One of the rads was on a few weeks ago before putting some x400 in, that has stopped 3. Another rad was partially working but now after a...

I want to reroute sink basin mains and my stud, before it was boxed in outside the wall cosuming a lot of space and not ashetically great. Trouble is ive got a plug socket from the next room near this basin. Is this not going to be compliant?

Sorry, only experienced noisy fans over the years. Can of worms on this, I'm wondering whether it might be better to just move the light switch and isolator to a switch outside the room near the door and then do an inline fan. The original build of the property only ever had a bath not a...

I'm trying to get rid of it not add another one :)

I mean the Isolator cord has gone, it was obviously pulled off. Come to think of this, in the other bathrooms I've got the fan coming on when I don't have the isolator on. The Fan's don't have an overrun they are from 1998 lol. I'd probably want the fans being controlled in some way when they...

Im refitting my bathroom at the moment and getting electrics sorted before the ceilings done. Current fan and isolator are as pictured. Plan for wiring is as follows; When I moved in the Isolator lead was gone so can't test it, does this mean it's connected to switch live currently? Can...

Did similar in my kitchen with an arch separating. The plasterboard between rooms most likely be level so bear that in mind as I didn't!

Here you go...

This has worked but it's been rather tedious but satisfying, I did this much in about an hour or so. First issue was I'd not got the washer on provided in the herzo kit so it wasn't getting enough depth but that bit now works. Plus side of this is I'm not full of dust. The SDS Scraper on...

When can you start :D What do you do if the chipboards under existing stud wall? I'll see what state it's in tomorrow, pretty sure AG and segmented blade will sort this mess out.