Search results

Rear wall stage three: Scatter coat i.e. throw/flick "cast on vigorously" , do not trowel on/off. Just a suggestion.

https://www.ebay.co.uk/itm/256257001143

Don't think there's a problem. You don't need to hit your studs dead centre and anyway there's horizontal play on the bracket position on the radiator nubs. You don't have to use the pre-drilled holes on the bracket, either.

https://mcalpineplumbing.com/wc-connectors/flexible-wc-connectors/short-90-back-to-wall-flexible-wc-connector/ might suit

Download the fitting instructions for your proposed new cubicle and compare the tolerances with what you will have after overboarding. Also, check your walls are plumb!

King John, Act 4, Scene 2,

Nah, finger pressure on the handle holds the the outflow open; that's shallot. The Fluidmaster version is of USA manufacture; even they eschew "scallions" as a durable component. The french versions come with a certain "je ne sais quoi" hint of wild garlic but that's more to do with the...

Drain system, undo the third nut on both valves,loosen the brackets and pull the bottom of the radiator forward an inch. Undo brackets and remove rad from wall.

Very much fronded upon to use oxblood today, except in certain Mithraic initiation rituals. Edit - i'm wrong here ; the followers of Mithras slaughtered bulls for sacrifice, not oxen. Replacing the ballvalve is probably the simplest and best solution.

Of course not, nor should the flue wobble. Your man's a t**t. Get someone else in to redo the job properly and, for your own sanity, have no further dealings with the original installer. Going after the original installer for the costs of this -and remember your daughter was not the original...

Loctite 55 cord would be better than PTFE tape. Videos online for how much -its more of a "feel" thing, you want to feel some resistance on the last turn(s). Could use hemp and jointing compound- some people disapprove but the continentals still use, indeed the threads are pre-roughened to help...

.

YES If you then turn on another cold tap fully e.g. a garden tap your gauge will then read the dynamic pressure.

Yes III

According to Floplast ' "There is no maximum gradient; a fall of 1:10 is usually considered as a maximum guideline. BS8301 states “Research has shown that high velocities of sewage flow arising from steep gradients do not cause increase erosion of pipes or deposition of solids.” '...

Increased radiator sizes may require larger pipework. Survey and calculation required.

3-part plastic high-level flush pipes are still made for retrofit, cut and trim as required e.g. https://www.cityplumbing.co.uk/p/wirquin-macdee-high-level-flush-pipe-3-piece-white-side-wall-dfp12wh/p/931543?srsltid=AfmBOorr2PvEmTzkYzUJsPmyP1sjq3r6iFdlqhySgI9-n-YswhgHJY-f

First impressions very likely correct...

21mm approx OD black alkathene will be 1/2" imperial nominal internal bore . Roughly equivalent to15mm copper and 20mm OD modern blue poly.

The twyford classic pan is available in both horizontal outlet and S-trap versions. Can be used with both high and low level cisterns.