Search results

  1. A

    Washing Machine leaking

    Beko washing machines often leak from the back of the soap dispenser, unplug it take the lid off and have a good look for signs of a leak.
  2. A

    hotpoint washer dryer.

    Have you checked the water heater element, that will give you F08.
  3. A

    Neff Dishwasher tap light and no heat

    Usually is the heat pump, did you unplug the connection with the two red wires and earth and meter the two connections vacated by the red wires.
  4. A

    Condenser dryer belt jump

    It's normal, just change the belt.
  5. A

    Dishwasher check water help needed

    Did you re-connect securely the supply plug to the flow meter.
  6. A

    Bosch Dishwasher Part Identication (Leak/RCD tripped).

    There is a tank repair kit that consists of metal straps and seals to help when they leak like yours. As long as the tripping has stopped.
  7. A

    ElectriQ oven light on but not heating up

    Have a close look at the function selector switch, they have a nasty habit of melting.
  8. A

    Ikea Renlig DW60 washing hot, but not drying

    It has only ONE heater the flow thru one . The circular solid element is a random cooker fan element.
  9. A

    Ikea Renlig DW60 washing hot, but not drying

    It's a Dishwasher not a Washer Dryer, just the one flow thru element.
  10. A

    Leaking Beko Dishwasher.

    I very rarely need to change a dishwasher door seal unless it's got a chunk out of it.
  11. A

    Leaking Beko Dishwasher.

    Have a close look at the lower spray arm, they sometimes split on the side seam shooting water out sideways breaching the door seals. I think you have a DW663.
  12. A

    How to get to the brushes on Karcher K2.94M?

    It's a capacitor motor, won't have brushes.
  13. A

    Tumble dryer drive belt replacement Zanussi TC484W

    The correct belt is a 1975H7 what numbers are on yours.
  14. A

    AEG dishwasher door tubes

    The two grey hoses are overflow pipes, they put water into the base in an overfill situation and trigger the anti flood. They are clipped to the underside of the sump.
  15. A

    Heat pump tumble dryers

    Montpellier MTDI7S is a built in vented dryer if still available, made by White Kinght.
  16. A

    CANDY CDI2210 - Error E8 - replace heating element?

    It comes out the back, you have loosened the centre nut, now has to be prised out.There is a rubber grommet that expands when the nut is tightened.
  17. A

    Siemens SI 14.44 iQ700 washing machine reset for an F43 error

    You use the rpm button.
  18. A

    Neff S51T69X2GB Dishwasher Check Supply Light

    The salt dissolves in the container leaving saline to recharge the softener. The large plastic container on the side is the heat exchanger, it will be full of water at times getting a warm up.
  19. A

    Bosch dishwasher keeps filling

    You don't have an impellor jug on yours the fill level is controlled by the pressure chamber. You say you have cleaned the ribbed pipe with the o ring going from the pressure chamber to the sump, did you take it right off because a blockage in there gives you the issue you are having. If you...
  20. A

    Bosch dishwasher keeps going into "flood mode"

    There is a Cabinet seal kit for the back and side thats leaking Pt. No. 11038786, if that is the only leak.
Back
Top