Search results

Me neither that’s why I want to lose what I can. 2 issues 1. Where to run new socket from 2. Can I lose the rest or have to faceplate?

B is a single switch that doesn’t do anything. Has 1 red yellow an blue wire. The 2 going into A are white. I reckon they cut those in D and pulled back to become A. You can see where they gave channeled out most of the wall. I would of thought to lose A I would need to pull the cables up into...

I've just removed a corner unit and some cupboards in order to put a fridge there. On doing so Ive found a right old mess. Hopefully the photos are big enough to explain. I basically need a double socket where ive marked in red. On the other wall around a corner I have a double socket marked...

Hi All, I have solar panels and a Elster A100c Meter where the reading panel is flashing all characters every second or so. Tried turning the power off and on but no change. Red Led is flashing as expected. I have circular reader which fits over the red led and enables a remote handset to show...

When it is heavy rain there is a gulley in my roof that hits the guttering and goes straight over the edge. Is there anything I can buy to raise the height of one side of my guttering? just need a foot long flat piece that ideally clips on the top of my guttering edge. Can't seem to find...

It’s tripped today so I’ve flipped it back but.switched the outside lights off via fused switch in the garage. Problem is how long I leave them off as it hasn’t tripped for a couple of days.

Its an mt110 mcb. What I have also just noticed is that my electric meter for my solar panels is flashing LCD so perhaps that went off when the heating mcb flipped. It's flipped twice now but been ok for last 24 hours. Now need to also work out how to reset the solar meter!

My house has an extension which is a double garage with a bedroom above. The bedroom is very cold. I cant access the roof area from the main loft so not sure if there is insulation. We moved in summer and had new carpets fitted so I now cant lift flooring to put insulation in floor. Any ideas? I...

Called the fitter who said he didnt drill the walls so maybe a coincidence. When it went off I noticed our outdoor spotlights were also off so some cowboy may of put them on the same main marked as heating. If that is the case it could be water getting in one of those I suppose? Been living here...

Hi All, I had a wardrobe fitted on friday and noticed on saturday morning that my heating hadnt come on. Checked my electric and the heating circuit breaker had tripped. Flipped it back on and was ok until this afternoon when ive found its tripped again. Back on again but obviously something...

I know what a crimp is, must of used hundreds of thousands, but not an electrical one. was looking for a product ideally. If i could hide it i would use a wago but I dont want to make a hole in the ceiling if I can help it. The joint will be a foot down the wall which i'll then cover and...

What do you crimp them with? I'm only familiar with phone cable crimps

it was. watch this space........! i had no choice, all the sockets/switches need to match. I have 3 double sockets, 2 fused connectors, 1 single light switch and the treble.

HI All, I currently have a tall fitted corner fridge that i want to remove, but have found that there are 2 electric cables coming out of the ceiling surface mounted to the wall and going into a surface mounted double mains socket about 8 inches from the ceiling. I need to sink these into the...

Yes i bought a new 3 gang SWITCH. Translating the connection from old to new was my problem, but the experts on here said it looked like I had fitted it correctly, but it only worked 1 of the 3 lights. When I put the old SWITCH back all 3 worked as before. I've bought another SWITCH so will try...

ok so put the old socket back and all works fine. how annoying. Only positive is i must of lost some weight up and downstairs a hundred times switching the breaker on and off. So is that definitely a dodgey socket then?

how do i tell which one is working? the right hand switch is working. if the wires behind that are the ones then its the red on its own in 1way.

swapped the reds and now have 1 light only working. So I have 1 com linked to the 2 other coms of the 2 cables i have 1 red to a 1way on its own and the red from the other cable sharing a com. the 2 black are in the other 2 1ways on their own. Result 1 light working 2 switches doing nothing.