Search results

Answered my own question.. please close admin!

Hi all, Need to put plinth lights in the kitchen, there is plug sockets low level not being used. Basically is there away I can install to separate lights from two different sockets switched by one switch? Quinetic do anything I could use ? Thanks all

Says 1/4 on the pipe supplied with the fridge ‍♂️

Divy here thought his cold water feed was 15mm.. so bought a 15mm - 1/4" reducing tee to plumb a fridge. It's 10mm!! I've already cut it so stuck a stop end on. What options do I have as I can't find a 10mm - 1/4" reducing tee... Do I get some 15mm pipe and use 15mm - 10mm reducers ? ‍♂️

Hi Johnny, Doing this Saturday... Got the reducing tee and some 1/4 od tube to go to the filter. I know I need 15mm inserts for the cold water feed connection... But I can't find any 1/4 inserts ?

Do I need one of these then? Then 8mm pipe? It's going to a Samsung filter and fridge.

Looks like it's 15mm under the sink but the actual cable that's comes with the fridge and goes to the filter is 1/4" (8mm) ?

Cheers pal.. 10mm or 15mm? Or smaller?

Hi all, Useless at plumbing! Can you help. I'm plumbing in a Samsung fridge Freezer, and the pipe will come through where the red dot is. First is it 15mm pipe I need? Second, do I just cut the cold water feed and put a speedfit tee in? Do I need an isolator? Any advice and help on...

Builder is coming back out Friday.. thanks lads

So get them out to skim again and repaint ?

It's a silk. They skimmed half way across the wall then just painted it, instead of skimming right across. I was going to just try and sand it out before getting them back.

Hi all, Before I attempt it.. I've bought an orbital sander :confused: Can I sand this wall so its all smooth, or does it all need to be skimmed? I have no idea why the lad stopped half way when skimming originally. Thanks

Surely he could of lined up the skirting better ? And skimmed right across the wall ? Just don't want to go back and sound like I'm moaning about nothing

Hi All, Had the front door moved forward a few meters to make the small hall a little bigger, you can see here the bodge the builder has done joining the new and old wall. Would you get him back out to sort ? Or just do it yourself ? To be honest, he has been a nightmare ! Thanks

Perfect... thank you !

Just wanted to double check... I have an adaptable box on my wall with 6mm cable / 32a mcb - waiting for the shed to be built, then run the armoured to a small Cu in the shed and so on. This isn't going to happen for a good while, but I do need a socket now where the box is.. will it accept...

Yes these are M4 X 38MM

Hi.. No didn't tighten first, should I ? And I did use a screwdriver. I'm using the Rawlplug anchors and tool..

Just 15mm I presumed? It's a partition in a new build... It's dry, it's 4 years old