Search results

okay this gives me some ideas I can look into

okay money no object whats the cheapest way of doing this buying or hiring. seen somethings on line that arent mega expensive but not sure how good they will be and how good I need them to be, to be fair

hmm thanks.

I am not a sparky. However I suspect an electrical issue maybe occurring in a supply to an out building where part of an alarm system is housed. It’s only the part in this out building that’s affected. It could be the switch mode power supply doesn’t like the feed comming in and it’s being...

I have no idea, have you tried reaching out to Eaton/ Scantronic? But you probably need an R&D bod rather than a tech support agent.

Same as the strobe is okay too, I know you prefer the Xeon tubes, can get a nasty shock off them.

There is nothing wrong with it though?? I guess the question is should it be the same brightness or not by design, how much of it is down to how it’s being viewed I can test it to some degree in if it looks the same or not.

deffo looks normal, But on this device I can see the brightness you claim to be seeing. But this is the correct operation.

Hmm looks slightly different on this device in terms of brightness but looks normal to me

i believe is the video

That’s assuming that’s I have the right video, you could post the link here to see what others think and I can check I had the right video

no worries, without them seeing your problem not sure how they can comment. As I know I would need to see the problem to say oh yes that’s not normal or yes it is normal. However videos can be subjective due to frame rates and resolution, however you should see a significant dim on the same...

We don’t give ours out sorry, there’s a few places online that have them, some verify your an engineer and others don’t. Security installer forum is back up and running I believe lots of folk on there with manuals both on forum resources and companies, they used to verify you as an installer...

Someone even used to sell them on eBay, no idea if they still do.

Have you searched online, they are readily available on various sites?

Ali please do not call me again. Email the video when you have it. I am struggling to believe your unhappy with a products performance and your still using it, rather than sending it back. When you called the second time you told me things which you are now contradicting. Email me the...

Never got the video of the bells from you, do you have these or not? Just the second time you phoned me you asked for me to test our bell stock to see if we could replicate which is cheeky at best but if your having a problem and I use these bells I have a vested interest to make sure there is...

you have the answers, on the orisec panel similar outputs exist. The CP20 has 5 panel outputs as standard. so wire it to one of them. output 4 is programmed alarm at default and the attribute can be inverted, its the second option

To get the back light on or off at night you have to wire it to a photo cell so it comes on when it gets dark positioning may be an issue. Otherwise it’s programming on at x and off at y problem with that is it’s summer day light is different winter day light hours. You can use holiday times...

It requires lateral thinking they have shown the wiring and programming for there panel which is all you can expect them to do I didn’t see how the alarm output is what you were asking for earlier. End of the day the principal is the same. You supply 12V red lead ground/0V black lead and back...