Search results

Thanks very much for the reply. It's not a plunge base. What I'm getting confused with is I've got this large cutting bit with an attached bearing giving the offset I need for the width of cut but I don't know how I set the depth of cut!

Hi All, Never used a router before and I've bought the Katsu one from Amazon. It doesn't come with any useful diagrams showing how to set it up so I thought I'd ask here. I've bought a rebating bit (https://www.amazon.co.uk/dp/B07SJ4YBVL?ref_=ppx_hzod_title_dt_b_fed_asin_title_0_0&th=1) which...

Hi All, About 10 years ago we had a small leak from our loft which caused water to come through the ceiling in our bedroom. The stains aren't terrible or large but as I'm decorating the house wanted to repaint the ceiling. I'm put two coats (so far) or BIN Aqua but still the yellow stains comes...

Hi All, I've seen this protective plastic sheet with integrated masking tape online and as I want to protect our wardrobes when I paint the ceiling wondered what people would recommend? Cheers Daz

Thanks. So is that a no to use ceiling emulsion on the wall I have with black? Here's a pic...

I've also got a small wall with black matt paint. I was going to use my matt ceiling emulsion on that (also Leyland). Would that be ok instead of undercoat?

Will do...cheers!

do you think that after 4 coats of undercoat I'm okay to start with the top coats?

That was before I started painting. It's now had 4 coats of white undercoat.

Hi All, Four coats of undercoat so far using Leyland white primer and undercoat and a Two Fussy Blokes mini roller sleeves and I can still see the previously painted black wood surface a little. Is this normal? Do I now call it a day and start painting with the top coat (Leyland Multi Surface...

Soft close seems a lot more expensive. Really don't want to spend like £100 or more on hinges. Do Blum do a non-soft close alternative?

Thanks. Do you have a link to the right hinge at all?

I took the doors off earlier to gain access to a screw going into the ceiling. Wish I didn't. All the doors are now out of skew and I'm too stupid to work it out.

Why?

Thanks. Yes, they are 35mm cabinet hinges . These https://www.screwfix.com/p/eclipse-99016-steel-105-concealed-hinges-64mm-2-pack/536kw Sorry to confuse by saying 100mm

The doors are around 19mm thick. I would say without checking in too much detail that the doors have warped slightly but not to the extent that if I push them closed and hold my hand there that they close all the way. Just need something beefy enough to hold them closed that's easy to open too...

No. Mags are nowhere near strong enough. The doors are quite heavy and as they are warped a little need something quite strong to hold them closed.

Hi All, 25 years ago we had a chap make some wardrobe doors and carcass for my daughters bedroom. The doors are around 2m tall by 0.6m wide each and are secured to the carcass by 4 cabinet (100mm) hinges per door. Over the years the doors have warped slightly and the hinges moved. As I'm...

Thanks again @Wayners . Do I do this before I've soaked the new lining paper in wallpaper adhesive?

Thanks @Wayners for the reply. I'm a little confused though so maybe you can advise. As I intend to cut through both this new lining paper and the old with the idea of removing the old paper for the new one to take its place, how can I do this given that the old lining paper is thick and a...