Search results

t he at was my thought/solution also, but will the 3 pipes that can get warm, not affect the cables in anyway where the conduit passes underneath the pipes, or will it be insignificant and of no concern ? thanks again for your input

thanks for the input There won’t be any long term heavy usage of the types you mentioned Simply it’s a small freezer, washing machine and a tumble dryer, and then occasional tools (chopsaw, sdsdrill etc) and a heat pad for my home brew :D

Thanks for all the input so far ! So for a little more context, here is a photo of the piping I want to trunk behind : that trunking piece is 25x16mm and as mentioned, it’s a really tight fit….too tight, just like my suit trousers from too much WFH and eating rubbish :D I’m sure I could...

So onto next question….. do the cables need to be in trunking or can they simply be clipped to the brickwork ? And the same question re:need for trunking where the cables need to go underneath some central heating pipes ? the central hating pipes are secured with pipe clips so there is a gap...

:D Absolutely domestic EFL !!! Thanks for quick reply

Hi all can anyone confirm whether plastic sockets and back boxes are allowed to be used in a garage, or are only the metal (far more expensive) type allowed please for a 5 x double socket ring main ? The sockets will be for an under counter small freezer , a washing machine and a tumble dryer...

I forgot to ask Lucid…..I assume I can use AV1 scart and hook it up to a TV so I can see what’s playing, yes ?

Thanks for confirming Lucid I’ll give it a twirl ! (y)

Hi there, I'm looking to copy some family videos onto DVD for safety and prosperity for my dad. I have an old Matsui VHS player and a Pioneer DVR-420H dvd recorder (it has an internal hard drive also), both in good working order Can anyone confirm how i hook them up please as the video...

hi Swwils can you confirm if your outside socket is unswitched please ? I’m curious because I am following the advice kindly shared by flameport, but I’m struggling to find a replacement BG unswitched switch, to replace the switched one that came with the original socket TIA

Hi again flameport....apologies for the delay and yet more questions As advised, i purchased an unswitched BG socket to swap into the housing, but as you can see from the pictures, the profile is significantly different and doesn't sit flush inside The switch that came with the outside socket...

I really didn’t want any cables on show but I’m out of options now TIA

Sorry for yet another question….. where sockets are in plasterboard stud wall and approx 6 inches above the skirting board, does/should the cable be in any sort of trunking, or is it ok to just poke up through the horizontal cardboard ?

(y)

flameport : thanks for advice, i'll be sure to check beforehand 2 further questions (apologies) Q1 : Can you confirm if 25mm x 16mm trunking is suitable for running a single 2.5mm t&e please ? from what i can see its perfectly find as there is a percentage of "free space" required in trunking...

I’ve had a flick through the above mentioned thread randomgrinch Seemed to get rather heated at times didn’t it ! Upshot is that will split them and put in their own trunking Ive got some 30mm D profile which aesthetically looks ok and seems that that is the minimum size that can be used for a...

thanks for the reply Grinch i'll take a look at the thread shared likely before bedtime as i'm guessing it will put me to sleep so will save on the Ovaltine ;) regarding trunking, yes i could i suppose have an addition piece of trunking alongside but it'll look a mess appreciate that you are...

Hi all...can anyone advise here please.... I need an outdoor electrical socket on the front of my house The easiest way way to achieve, is a new dedicated feed from the consumer unit to the socket, but this would mean from floor to ceiling (2.4m), the 2.5mm T&E cable and a telephone cable...

thanks JohnD if my dad is correct in that when he closes the stop tap but the water doesn't shut off, what is that a sign of exactly ? is it just a rubber washer that has likely perished or summat else ? yes there is a stop cock at the end of his drive where we will isolate first (y)