Search results

EDIT Post withdrawn; incorrect info.

At the wiring centre the three black cables with 5 conductors each will be standard (google S-plan+) , connected to three zone valves. You can take an educated guess on the the neutrals and earths, subject to testing. With a multi meter and Wagos and possibly some extra cable you should be able...

Historically, the Dutch would disagree!

Yes

Then my job is safe!

OK, here's an AI challenge! Would anyone who rates AI like to answer 666Rick666's question posted in the plumbing forum on Friday? Please post the answers from different AI machines in reply here, and indicate which answer you regard as the most accurate/useful. Question is: " I have a Biasi...

+1 Including ready access to flue, filter and RF receiver

Why not ask your "reliable service guy" for his opinion? FWIW mine is: there are over a million oil boilers out there in the UK, mostly in rural areas , you'll be fine on servicing for 10 or 20 years 50 years - who knows, but will it matter to you?

Bear

Try here https://pumpexpress.co.uk/product-category/accessories/pump-controllers/pressure-switches/

Turn off water. Pry off the small cover on the side of the handle. Unscrew the cross-head brass screw now revealed. Pull off handle. Unscrew cartridge with adjustable wrench on the large hex. Can also use a ratchet with a deep socket if you have a set of these. Support tap body whilst doing...

I've seen this done on "tanking" - working up from a porous wall to to a waterproof final cement-based coat. Also, its my experience that if you mess with plaster/render too early it all falls off again! But plastering is not my trade, so was a suggestion only.

Rear wall stage three: Scatter coat i.e. throw/flick "cast on vigorously" , do not trowel on/off. Just a suggestion.

https://www.ebay.co.uk/itm/256257001143

Don't think there's a problem. You don't need to hit your studs dead centre and anyway there's horizontal play on the bracket position on the radiator nubs. You don't have to use the pre-drilled holes on the bracket, either.

https://mcalpineplumbing.com/wc-connectors/flexible-wc-connectors/short-90-back-to-wall-flexible-wc-connector/ might suit

Download the fitting instructions for your proposed new cubicle and compare the tolerances with what you will have after overboarding. Also, check your walls are plumb!

King John, Act 4, Scene 2,

Nah, finger pressure on the handle holds the the outflow open; that's shallot. The Fluidmaster version is of USA manufacture; even they eschew "scallions" as a durable component. The french versions come with a certain "je ne sais quoi" hint of wild garlic but that's more to do with the...

Drain system, undo the third nut on both valves,loosen the brackets and pull the bottom of the radiator forward an inch. Undo brackets and remove rad from wall.