Search results

And the flow rate at the kitchen hot tap?

Felt lagging is disconcertingly flammable and apt to smoulder; I'd suggest stripping back and dousing before letting rip with a naked flame.

kW and kWh are not the same!

This is a UK site. Try https://www.heatlink.com/contact

Ferkin heck -missed that!

Set the blue stat lower. Under no circumstances attempt to link out or bypass the safety overheat stat.

??? Video shows drip from the clear hose. Anyway it's from an faulty auto air release valve which requires cleaning or replacement.

^^ +1

heating pipework undersized or incorrectly connected to emitters +1 Unlikely to be boiler problem.

Can't help but think the answer is in the question..

Then Then, if you have a 3-port or two 2-port motorised valves, the system has probably been miswired.

You can imagine whatever you like.

Picture of the whole mixer showing both sides, please.

This. High and low so that theres a circulation of air.

Quite agree.

Very much the responsibility of the gas fitter who worked on your cooker pipework to have relit the back boiler pilot, or at least made every effort to do so. Your back boiler may be due a good service and possibly replacement of a couple of inexpensive parts but is most unlikely to need...

"I think this is a simple question." I count five questions in the above post. Answers in order; various,yes,no, yes and yes.

https://www.screwfix.com/p/essentials-brass-cistern-lever-arm-75mm/4912r

If you're pumping away that hard your syphon washer needs replacing.

The air tube(s) in question will be to the push-button second left from the shower handset, not the one you're looking at.