Search results

Was just a bit concerned as never noticed it on a felt covered garage roof. Just concerned the moisture shall rot the wood on time..... Included some pics you should be able to see the moisture line on the beams and also beading on the boards.

Hi 3 years ago a friend of mine had a new flat garage roof installed using 18mm osb and firestone rubber with some form of liner between the two. I've noticed that inside the garage this time of year the osb is very damp and forming a moisture layer which seems to be across the entire area. The...

I've got a Worcester Bosch Greenstar 28i junior combi. When I have the eco button on so no preheated water it works fine both hot water and heating. If I run eco I struggle to get any hot water but the heating is always fine. When demanding hot water in eco mode the boiler tries to fire up and...

Excellent thanks, all working!

Hello! I have a hive single channel receiver that I wish to replace my Honeywell wall stat, please see attached pictures. I have read that I require 5 wires to the hive receiver but was hoping to replace my existing stat with the hive as a straight swop but it only has 4 wires to it. My...

Currently running armoured cable to my shed, all dug to depth of 600mm, with sifted soil, electrical warning tape etc! Only plan to run a tumble and light. I am now at the house end near the electric meter. 2 foot above this on the inside is where my consumer unit is. I plan to run my cable...

Hello, my parents had a boiler fitted in the loft but on these cold nights the external stat fitted to the wall kicks in. Obviously its doing its job but its noisy and sometimes wakes them up! On a cold night i presume the boiler will run all night. Can't a state be fitted to the pipes instead,?

Thanks for the replies people. Added a few photos for close inspection. What shall I do with the paint thats flaking off, I am worried the tiles won't bond very well.

Hello Hoping someone can help. My girlfriends bathroom paint that was applied before she moved in is covered in tiny cracks all over. It isn't the best job, what has caused the cracking? The paint looks like a Matt, might be wrong. The next thing is that some paint has peeled off...

I have left the red on the stat connected to point one and the yellow to point 3. Which goes to which at the boiler end please, thanks.

It is biasi boiler, 24sm/b, the stat on the wall at present is a honeywell

Yes will try that. Are these stats meant to work correctly on 3 wires? Would i be better buying a stat suited to a two wire set up?

So i am more than likely to keep pins 1 and 3 connected as they are?

Thanks will note all this down. Yes found the loop on the boiler connector. Just looked at the honeywell wall stat and its wired in as follows, please tell me which i need to keep, remove or change, thanks. 1 = red 4= blue 3= yellow arrow icon on the stat has wire to it, assuming this...

Thanks for the reply. Can you buy safe connectors for extending the cable? Thought about wiring it in myself but would be worried i would wire it in wrong. There are many wires on the room stat but less connections on the boiler for it which beat me!

Hello I have noticed at my other halfs rented house that the room stat for the boiler hasn't been wired in. The boiler was replaced a few years ago, its a Biasi combi. I think i have found the stat cable in the wall near the boiler but even if someone came to wire it in its too short by...

I just wired it up like this, the grey dashed line = the linked piece as suggest but am i wiring it the incorrect way, god im useless....as the fuse went BANG again! It was wired up with a linked piece on the old switch i had, but forgot to check how it was done before removing it.[/img]

Thanks for peoples help on this but i really do not undestand the electrical terms used eg COM, L1 etc! Could someone please try and make this more simple for me please.... Your existing cable goes red -> Com, black ->L1. You need to link the two COMs with a short piece of red, and connect...

Really in need of some help, just hoping this picture works. I have an outside light, that requires a feed from an internal light, but cannot work out how to do it. I have a live, neutral and earth from the inside light to the switch, but only a RED and EARTH wire coming from the outside...

Before it was 1 single wire from downstairs and 1 single wire from upstairs, each going to 1 end of the old ceiling rose.