Search results

If I do remove the toilet, I would definitely replace those two as I believe they are silicone and tend to develop a 'memory.'

Thank you; pretty much what I think. It is all clean and tidy behind the bowl so no reason to expect the seal has become crumbly.

Thanks

As the seal is part of the junction at the very right of the photo, with the toilet in, downpipe and the vent from the top, there is no way that it can be easily removed or replaced. Hence my question, can the seal be replaced?

What ho one and all, I am trying to fish a CAT6 cable from the loft to the g/f office space and the routing will be down a vertical sewer pipe boxing in a cupboard below. The issue is from the f/f toilet, I need to go around 1 meter horizontally through three posi-joists and the entire space...

Magnets are a non-starter since the Posi-joists have metal webbing.

It would be so much safer if Open Reach could work from home! Am receiving text messages telling me that I have a provisional appointment for an OR engineer to visit to check what work is necessary before they come to connect the FTTP to FTTH, a distance for around 30m. Apparently, the...

Forgot to mention that the EE guy told me that Openreach will not work in the loft unless they have had special H&S training, and not all have. But of course, it is ok to work up a ladder at 9m. I know they don't know how my loft is but for the sake of clarity under this thread, here is a...

Again, thanks for the response. While I am more than able to install the CAT6 cable and fish it through the boxing were the sewer pipe drops down, I assume this is a brush plate? https://www.amazon.co.uk/Ethernet-Keystone-Voltage-Mounting-Bracket/dp/B0CZS95T4R?th=1 or this...

Thanks. Tend to think you are correct. May be best to get a regular CAT6 euro module and cut the final plug off the cable.

What ho one and all, My Plusnet contract is coming to an end so am moving to EE because they can provide a VOip service. My house does not have CAT6 installed and I want the FTTH box (currently only FTTP) in the loft (where the current line is located) Intend to run a CAT6 from there to the...

Yes, but my system only has seven PIR sensors plus an additional RKP in the garage. So not really too complex. Also added something that I should have installed when originally installed 15 years ago, an internal sound bomb. With a well insulated, tripe glazed house, once inside, it is close...

Thanks for the link. As it happens, I did buy a new (albeit now discontinued) Reson 8 bell box, installed it and it made no difference. So took a chance on a newish Accenta Gen 4 Mini from an eBay seller. Installed it went through all the resetting process and, with the original bell box, all...

Thanks, I do in fact have the engineer manual; it is just my lack of understanding. I thought I had posted again earlier to say that I have done it but somehow, that post got lost in the internet. I was setting it fundamentally incorrectly. Following the above instructions with three presses...

Compliments of the season one and all, Having just replaced an Accenta Gen4 Mini, I am now trying to set it up within engineer mode. As a non-alarm expert (ie, alarm numpty!), I do find the language in the engineer manual to be confusing, but.... Have everything set, zone names, exit...

Moved the sound bomb to below the panel so the wires are not immediately adjacent to the mains or transformer, and as expected, the humming has stopped. Toodle pip and compliments of the season

Have the replacement panel up and running and since if it activates, it is impossible to hear the external sounder in the house and particularly if entry is from the back. So this time, I have fitted a sound bomb, if for no other reason that the excessive inside noise is slightly disorienting...

Fitted the replacement panel today and everything is working as it should. No 'noise' from the external sounder when the mains is connected so can only conclude that something on the panel had 'freaked out.' Now I have to reprogram the RKP but it is working on the default code. As an aside, I...

Thank you; I’m on the case tomorrow.

So I connect it to the Bell terminals on the panel board?