Search results

She might add celotex type stuff and I would fix that tight to the underside of the floor with some slate lat. Is that how you would do it? There are a few on the outside that were all blocked up with silicone. The house flooded about 15 years ago, during a massive downpour and all the road...

Long time no see :) My daughters house had a springy floor so we suspected the joists to be rotten. They are very rotten so we have ripped them out and are left with this: The old timber was 4.75x2.75” and balanced on broken brick pieces, no DPC at all. I plan to put back in 6x2 on a...

I don’t think it will be locked, just seized.

I’ve noticed. I want a Golf Edition 40 but the price of them have gone stupid.

Lintel it and put a lid on across the shorter span:

I did mine 5:1 wet. I’d done a couple of other areas in the last couple of years exactly the same:

I’ve just put mine on 50mm of wet sand and sharp sand mix on a hard clay/soil base. There’s a low bit that I brought up with MOT

I’d raise them up to the height you want.

Love that!!!!:LOL:(y)

I fit them plastic pits for a living now Nige :cool:

What did you say?

The gaps are about an inch deep and there is wood at the back. Should I screw plaster board to the wood then some rough plaster to bring it level with the old stuff before it gets skimmed?

I would hire a structural engineer to report on the washing line attachment to the fence panel. It’s in the corner so his calculations may show that it won’t damage the panel.

Is it 8 or 9” on the outside? I bet it’s 6” really.

Could you stick a fake row of tiles on the front of the dormer, same angle as the roof?

I’d be looking at doing loads of dye tests to the hg e higher properties rain water drains and to have the outlet near the door as the lowest point under your house.

https://www.tradepipes.co.uk/square-hopper-head-for-160mm-drainage

That will be too tall.

Are you sure it is pressurised? I’m not too well up on the maps but isn’t ‘VC’ salt glazed clay? Purple drains private and yellow shared/ST owned. And would a pressurised sewer have manholes? Edit: Forget that, I didn’t read all the posts, just saw the picture.

Use a 150/160mm one instead.