Search results

He’s now just out 2 layers of roof felt over and painted on some of thst sealant you paint on what looks like acrypol .. there’s no damp above the ceiling in the extension so I’m inclined to think it’s not leaking via the roof

Can’t really get many pictures from different angles as it’s against an extension wall and flat roof . You can see a roofer had a go at it and left it worse than it was and he now doesn’t responsd . The attempted to re felt a small area of the flat roof adjacent to it too

Hi all . Have a leak I Beleive I the juntion between the metal box gutter and plastic guttering where it forms a corner . It was previously sealed I guess with some sort of flash band products whcuh I guess has now failed . Think this was from manufacture . What are my options re products to...

Cheers

Siad it includes 3 layers replaced and yeah it’s pribs less then 1m 2 but was making round numbers

Nope literally nothing else needed apart from a 3 step ladder . Noted and thanks !

Should say 450 a meter 2

Hi all . Have what i suspect a leak in a flat roof over extension . Torch on stuff .what’s a reasonable price per m2 to refelt etc ? Been quoted £450 which I think seems a bit harsh somehow maybe I’m naïve to these things

Great thanks will look

Erm hard to tell from street level but doenst on 1st glance look like any up there ? You think perhaps moss raising the tiles ? These tiles were replaced a year ago due to this same prob so I think the roofer has I’m esssnce some sod all

Hi all as above . I noticed some wet marks under some of the roof tiles . Is this normal or supposed to be totally water tight ? Have read conflicting things so any thoughts appreciated

It is auto defrost / frost free . I had a look at the freezer evaporator . Was a lot of ice on it and what I’d call the “pipes “ coming off it with some electronics on we’re totally frozen over. ..so it’s prob not running the defrost . The fan doesn’t kick in ..

Hi as above freezer alarm went off for up to about -8 degrees . Fridge is always fine . Over night it seems to have Resloved but the alarm has been going off every now and then for a while . Anything I can check diy ? Have a multi meter etc

Hi all As above I need to replace a glass panel in an internal wooden door . Trouble is it looks like the glass is integral in the door and seemingly there’s no moulding that’s nailed in to hold the glass in place .it looks more like the glass was put in before the top of side panel of the doors...

Good evening all . I am planning on removing my current bathroom floor and wall tiles and replacing them . The walls are solid ie not plaster board. Not sure what the floor is yet . After I’ve pulled the old tiles off what prep do I need to do to the floor and wall if anything ? Do they need...

Hi all has anyone used one of these kits before ? Suspect faulty mixing valve but unsure as to where the replacement wax goes ? Cheers

The temp at the gauge at the red valve to the right of the pump used to go as hot as can be , now it won’t get above 45 at best if thst

Well up to the pump it’s hot , coming out it’s not if that makes sense..you can feel when the boiler comes on as the pipe before the pump cools a little then gets almost too hot to touch when the boiler fires up . To the right of the pump at the Manifold there is hardly any change this is the setup

Just as an addition , the flow temp just before the pump is really hot so it’s much higher than the 40 odd that’s getting to the manifold

Hi all . All of a sudden my ufh doesn’t get up to temp . Boiler fires up but between the boiler turning off when it reaches temp ans then the 2 minute off and then off when it reaches temperature , the return from the ufh is so cold , that the flow to the manifold never gets hot enough and hence...