Search results

Nothing to cast off rain above window , should have detail like this .

A photo might help , the drawing doesn’t .

I contacted support but took around 10 days to get a reply.

Doesn’t matter .

When decanting from 50ltr container I just use home made funnel , cut the top off a plastic bottle. You can discard it after use as it’s free . Unless this would fit ? https://amzn.eu/d/0bOCCY9S

Nothing to do with Mod, private contractors will be used by home office,

Very little financial saving , could even work out to be more expensive given the poor state of the housing .

If insulation was poor could be condensation .

Use clip on hinges and you don’t need to match any holes in the door . If there is damage you can use hinge repair plates .

Just buy a set of kitchen hinges , no need to match .

Just change the description to hobbit home

You really need new linings to match the doors , veneered doors allow for very little trimming .

Have you tried unscrewing it?

Downloaded it yesterday , not watched it yet but preview has the look of a B movie .

Many hardware stores sell by the metre . The reference to the junction box was to identify which wires need connecting as the cable is multi core .

Looks like you used the same tin lid for 10years .

As mention wrong tool , needs a scutch chisel , sds version quicker than by hand .

Don't see any grub screws, don't think there is room to rotate the hinge as it's tight to a wall when open , may wait till they return from holiday so I have help with door.Thanks

There are slotted caps on the pins , but slot are too thin to takes a screw driver , are they just plastic? will they knock out with pins?

A relative has this type of door hinge on an unglazed side door, the roller on the top of door binds when closing, the hinge side gap is equal at the top and bottom of the door.Can't see a way to adjust; online info is contradictory, mentions adjustable hinge pin seating and also allen key...