Search results

I have a 'twisto' 90mm waste with a black rubber ring to go around the waste and beneath the tray, there is then a white collar to go above the tray with 2 screws to hold them together. My question is....is the a completely dry fitting or should i put plumbers mait between black and underside...

What is the difference between pushfit and compression? I got the superseal ones and i have used the push fit connectors. Thanks for help. Glad the superseal ones were the only ones i could find in wickes!

i have used plastic pipe, i will go around and insert the inserts post-haste! don't want any leaks!!! thanks for speedy response :) *EDIT* - i like to learn as i go - are the inserts just to provide extra rigidity for the push fit to compress against?

hi everyone, just getting the water supply in for new shower position. do i need the pipe inserts for JG pushfit connections? someone said about them to me today but it doesn't suggest you do need them on the packaging of the elbows i have? thanks, i guess this will be a quick and easy...

i bit the bullet and got the mapei shower tanking kit :) i was also fearful oft ehbuy cheap, buy twice adage!!! thanks for responses :)

Thanks b17nns. It does seem to be the stuff! I was looking at other water proofing things and wasn't sure if they would work as well as that kit. Something like this... http://www.wickes.co.uk/Wickes-Bitumen-Damp-Proof-Membrane-Liquid-5L/p/151458

i have seen the special cement board screws for fixing. i am still a bit confused as to the best way to proceed. Am i likely to get problems if i use the water resistant plasterboard (with taped joints) and then tile adhesive directly on top of that? I am now looking into a damp proof paint to...

I have read lots about hardiebacker boards for shower areas where tiles will be used. I also read about tanking the area....i thought that if i put hardiebacker onto the studs and then position the shower tray against this with a silicone seal around the joint, then tile to 3 or 4mm above the...

not sure about the final finish yet. Does the hardboard have to be a certain thickness? or water resistant or anything like that?

now i look again at my photos, there does seem to be quite a gap between the stones - would this be filled with mortar? i am a novice at external work! i was going to get some mortar, scrape all the existing mortar that is currently holding the lead in place, then replace with new mortar - now i...

it is a stone window cill. It is hard to get a full shot as it is quite high and i regretably don't have a long ladder!!!

Hi there, i have taken out my old bathroom to be replaced. I took up the tiles that were on the floor and the chipboard/ply/hardboard or whatever was under them due to damage when removing tiles. I now have exposed floorboards. I think we are going to put down some lino as a finish rather than...

Last night in the terrible wind and rain we had i developed some leaks in my bay window. I#t has a flat roof and is flashed up into the wall beneath my bedroom window. The roof itself doesn't loo too bad and i wonder whether driven rain is the cause of the leaks inside...it seems to only leak...

totally correct Chappers! too far down the line!!! It is something that i didn't think of at the buying stage. I think i might still be in the returns period so i am looking into changing the whole shower enclosure with one that has the waste in a different position - otherwise i think there...

sounds like a good plan Chappers, the trimmers...do they just need to go from joists either side?

i feared that! : (

no, the actual waster will travel between the joists....it is the trap that will be directly on top ofthe joist

it is unfortunately a shaped tray and cannot be turned around! i need to see whether i have room to move it away from the joist and box out away from the main wall :(

I am getting ready to fit my new shower tray, but it appears there is a joist running beneath that is right where my waste needs to go...can i notch the joist and put noggins either side?

are there any suggestions for cheap wall covering then? Those pvc panels look ok but work out expensive for a room that has ceiling heights of around 2.8/3m! the existing plaster is a bit rough and i want to avoid skimming if possible - thats why i thought about panelling.