Search results

  1. W

    Baxi combi 80e no flame

    Nope, is that using air vent?
  2. W

    Baxi combi 80e no flame

    I can hear it spinning/whirling when i put the hot water on.. but again no flame. It is the same when i put the heating on.
  3. W

    Baxi combi 80e no flame

    I changed the whole pump unit but no success, I can hear the pump spinning but no flame on ☹
  4. W

    Baxi combi 80e no flame

    Thank You, it is better to change the whole pump or just the pump head... as i can see that i can get the whole pump or just the pump head? Thanks again all
  5. W

    Baxi combi 80e no flame

    Is it case of buying a new pump or can I try to take it apart and get it spinning as i am unlikely to be able to buy a new pump during the weekend Thanks again everyone for your help
  6. W

    Baxi combi 80e no flame

    Is it part that is readily available or needs to be ordered?
  7. W

    Baxi combi 80e no flame

    I tried taking the screw off and there is a screw another black screw behind it.. I tried turning it with a screwdriver but no movement The pump just gets hot.
  8. W

    Baxi combi 80e no flame

    Thank you.. do I do this with the boiler switched on or off? Thank you again :)
  9. W

    Baxi combi 80e no flame

    My back combi 80e will no longer ignite a flame. The flame failure light does not come either. I have tried resetting it with no luck. I tried to find a small button the internal pipe on the overheat stat.. but could not find it. I could see the overheat thermostat on the pipe but no little...
  10. W

    Heating comes on with hotwater

    Great thank you and i guess if no there is no water in it, I need to get one of the Diverter Valve Repair Kits and replace all the diaphragms and seals contained in the kit? Thanks again :)
  11. W

    Heating comes on with hotwater

    sorry to bother you again ianmcd if I put the hot water tap on running will I/where would I see the water passing through... I am unsure how I can tell is the water is passing through.
  12. W

    Heating comes on with hotwater

    Diverter actuator motor is the diverter valve operating head... is that right?
  13. W

    Heating comes on with hotwater

    Thanks. Is there another name for this.. I can't find it in the service manual? Thanks again
  14. W

    Heating comes on with hotwater

    which is the best kit to buy to repair this.. they all seem to have different numbers of washer/seals for example looking at this 3 packs https://www.ebay.co.uk/itm/Baxi-Combi-80E-105E-105HE-Diverter-Valve-Repair-Kit-248061RK-248061-248062/231734562535...
  15. W

    Heating comes on with hotwater

    Do I need to service the DHW Pressure differential valve diaphragm, CH Pressure differential valve diaphragm and diverter valve operating head as shown in the pdf attached? Thank you
  16. W

    Heating comes on with hotwater

    Thanks so i can try repair it with a kit like "Diverter Valve Repair Kit 248061 248062"?
  17. W

    Heating comes on with hotwater

    I have a Baxi Combi 80E boiler, the heating seems to come on now when I use the hot water even though the heating is switched off. What can be using this I have seen on youtube it could be the motorised valve/3 port valve, is this the diverter valve on the baxi? Can it be repaired or it is...
  18. W

    Miele WT945

    That is exactly what i did do however it only worked for 2 washes then the softener water inlet stopped working (red light again). I managed to source a used miele triple water inlet off ebay and changed diaphragm on the prewash and softener inlet so far it has been working fine now for several...
  19. W

    Miele WT945

    That video was a great help thank you very much. Do you know if it possible to buy just the diaphragm part? Or would it just be easier just to buy a cheap whole triple water valve inlet from ebay and take the one of the diaphragm off that and use it on my fitted one? Thanks again for all your...
  20. W

    Miele WT945

    Great thanks for the video and your help. No need to dig out your valve. I will try fixing the value myself following the video guide. Thanks again
Back
Top