Search results

  1. C

    Underfloor heating question

    Temperature will effect the pressure .
  2. C

    To swage or use a straight coupler (15mm copper rad pipes)

    Used one going back a few years ,all ok ,but not to sure with the modern copper,personally I’d go with couplings
  3. C

    To swage or use a straight coupler (15mm copper rad pipes)

    Used one going back a few years ,all ok ,but not to sure with the modern copper,personally I’d go with couplings
  4. C

    Honeywell BDR91 to Hive replacement

    Then you need a single channel hive or rewire to use the one you have
  5. C

    Honeywell BDR91 to Hive replacement

    While since I worked on one but isn’t a bdr a single channel receiver ?
  6. C

    Central Heating and Hot Water Questions

    Without seeing your system the gas boiler can operate the hot water heating via the cylinder and the radiators ,both can be set independently ,the gas boiler will operate when the clocks and thermostats are on.
  7. C

    Boiler types

    Probably pre 1990 ,will have a separate hot water heater either attached seperate, some people love them ,not very efficient and as far as replacing it’s compete system .
  8. C

    Central Heating and Hot Water Questions

    Yes the immersion would reheat the hot water if on permanent , expensive way to heat it.check your electric meter readings, to find out
  9. C

    Central Heating and Hot Water Questions

    Regarding hot water ,have you checked if it has an immersion heater ? that may be on
  10. C

    Advice for tall fence above existing brick wall

    A hedge will probably stop more noise
  11. C

    Sentinel x 400

    You will be ok
  12. C

    Baxi bermuda 401 back boiler. Gas technician disabled the boiler.

    What did it state on the paper work they left ,
  13. C

    Removing unused gas fire flue liner (no chimney stack)

    It should stay till fire capped off,it will come out easy enough it’s only a twist fit after tape removed.better removing completely as it will probably rain in slightly through the terminal
  14. C

    Temporary method for privacy

    Windowlean
  15. C

    loud noise and pipes vibrating when shower is on

    Possibly the ball valve in your cold water tank, be worth trying for the price of one.
  16. C

    Old lock shield valve

    Remove the brass top ,get some ptfe tape make it into a string ,wrap around the shaft and reffit the cap
  17. C

    Help identifying where Greenstar 30i bypass pipe restrictor fits please

    Any good
  18. C

    Help identifying where Greenstar 30i bypass pipe restrictor fits please

    If I am correct it’s install on a pipe from left to right manifold,( lot of years since I did one)
  19. C

    Help identifying where Greenstar 30i bypass pipe restrictor fits please

    Possibly the auto bypass
  20. C

    Worcester 24i Mk III Re-pressurising

    The screwdriver slot just above the silver flex , possibly one on the other end as well
Back
Top