Search results

You are impatient. It will take a couple of minutes........but will recharge the internal air gap.

A new boiler will never recover its installation costs in fuel saving The one you have could outlast 2 new ones. If it is trouble free.......Keep it !!!

Which boiler do you have

You need a relay.

To cure the dripping, requires stripping the pump unit to clean and lube the discs in mixer. Try Utube.

Loosen the two screws holding the fan and throat "The base of cast metal" to the boiler and twist back and forth. Unplug The fan.

Where is the programmer ?

Looking at the pipework suggests a recent change to a Y plan, (Which needs a H/W off wire). I have often seen the neutral wire used for this purpose and a borrowed neutral from any convenient source nearby. Try feeding the heating from a non RCD source to see if fault persists.

It was probably Vermiculite. The only asbestos was in the sealing rope around the cutout.

You would not get MY professional eye to look at it using 35 sec!!

The capillaries should only be touching where they are actually monitoring the temp. Check the control stats cut off temp first as the limit stat may be working as intended.

Have the installers " Borrowed " a neutral from another circuit.

What is the problem with that? Lots of things have P\l

Cherry Blossom have most of the roots very close to and on the surface.

It looks like a typical vent for a bbu fitted by a blind plumber. If you have no bbu or Decorative Effect Fire it is not needed.

My first thought is...."Why the fook would you want that mess on display??"

Or excess air (As you previously mentioned). Especially if a smaller nozzle was fitted without checking O /P ..CO2.

I asked Inspector what would be acceptable on party wall last week. Cheek is built on the party wall with 4x2 with 100mm kingspan ,18mm OSB. 2 x 9mm sheets of Superlux ,, Felt, Battens and vertical tiles. She wants 3x2 battens on a D P M fastened to the brickwork with 50mm insulation between...

How about using a 1/2" fibre washer.

Get a " Black Widow " and practice until you are confident to hit the spot !!