Search results

Probably inaccessible eaves roof space above there, best to run cable in protective conduit to a more accessible space

Find me a professional installer who still installs Visonic over the other systems…. Ends argument

All details can be gained through engineers menu you need panel model , system version , udl password

Pyronix enforcer all day

it’s not clear what exit modes you have selected for A and B. You have listed the options that are available

You have two sensors on the landing? One of them is programmed off your night set (B) and one of them is on both full set (A) and night set

Visonic are rubbish and outdated - Pyronix / Texecom all day

Texecom has received reports of Texecom Connect V1 displaying a "Server handshake error". We are investigating the fault, which appears to have started on Saturday. It is not occurring on all Android devices, and Iphone appears to be unaffected. We will update further when we know more. In...

EZVIZ doorbells are compatible with hikvision NVRs I believe

Set meter to DC check across positive and negative on each PIR for a voltage reading should be above 12v dc

Enforcer systems can only take two wired zones

I believe it’s just a N/C pair from output B to your desired zone

The SMS server that the panel is using maybe shutdown. You need to check how it’s set up in ARC settings

Pir require 12v 0v then either EOL (two wires) or all 4 depending how you’re wiring. So minimum 4 wires needed

Yes put one on a ur2-we this week

As above, zone 33 or 34 will be what you need to program for the tamper dependant where you wired it

60% of burglaries are avoided just by having an alarm. Unless you are in a rich and high crime rate area you are extremely unlikely to encounter a burglar who is a) not an opportunist and b) clever enough to operate a jamming device accordingly to successfully break in.

As above old sensors can cause this and also low batteries in local wireless devices. Another cause of jamming is newly installed LED street lights. turn wireless jamming to 000 and have done with it.

Yes it will work as a stand alone bells only system. You’ll need to disable the communications inside the engineer menus.

I second the method of deleting the first expander and relearning all onto the 32 way. We have had a couple of sites where the supervision issues are constant on two 8xp, swapped them for a 32 and no more problems fully meshed