Search results

use the pva to expand the wood ,then as you say cover with a good quality wood preserve

if you bought the post from a diy shed such as B&Q focus etc they tend to be cut a bit smaller than you would get from a builders merchants , i would wedge some wood shims down the sides,them coat them in a diluted pva solution ,

As a landscape Gardener i would agree about the cracks in the pointing , i to would have butted them together , if the others are rocking as bad as you say then i would sujest that the type 1 is either not thick enough or has not been compacted to a desired level,Ask the contracto if he spotted...

Many thanks for your reply she is in fact a 3.5 but i expect its the same , the garage have replaced the sensor and it was fine for a cpl of days but now the light has come back on , the car runs fine with no loss of power or juddering shes running as smooth as she allways have , the garage...

forgot to say its on a 55 plate

I have a merc c class 350 avantgard i had a warning light come on and i took it to the garage and they told me it was "Intake and exhaust camshaft position sensors on right engine bank" now i know nothing about cars so could anybody please explain what this meens i think the garage are trying...

Hi does anybody know how much is likely to cost to have electricity supplied to my garage ? it is not close to my home and i dont want to run a genie as the noise would be to much of an impact on the neighbours . I have a electricty pole about 100 feet away from the garage so they can take a...

Thanks John i a bit miffed as i asked the store if it was capable of doing transit nuts and they pointed this gun out as the best one for the job . It wasnt cheap either and when i rang them they said that they do not have any responsiblity for the product as i will have to take it up with the...

i have just bought a 24volt impact wrench ,i bought this so i could get the wheels nuts of my transit , Soft grip, variable speed, forward & reverse, electric brake, 1/2" square drive No load speed 0 - 2000rpm, impact frequency 0 - 4000ipm, maximum torque 400Nm 295ft/lbs Led Battery...

i have a honda wacker plate that i havent used for about 6months , i started it the other day and it started ok , it ran for about 3-4 mins then cut out , it started again and did the same thing , so i changed the fuel for fresh stuff cleaned the air filter and replaced the oil but it still...

easiest way is to pay a gardener to come in and clear your garden then buy a cheap strimmer that way you can maintain it yor self without having to buy a powerfull strimmer that you noy likely to use that often

The line is breaking because you are not useing the strimmer properly ! do not go full charge at the bottom of what you are strimming if its long take it of the top first then move down ,

For me its a def yes As im a landscape gardener it presents a more professonal image , i have asked my customers and most of them are more likely to employ someone with there name on the van as it give, s them a point of contact , and it also tells the neighbours that im a legit buisness ...

B~~~er me ! i take the bloody thing to a Stihl dealer and yep you guessed it the engineer grabs hold and it starts on the 3rd pull , i feel like a real na na as a shop load of peeps look at me as if im a ******, i point out to him that it had trouble starting and he tried again and it wouuldnt...

John ive tried the petrol down the plug but it didnt start ,commpresson is good ,like i said shes like knew so there shoulb be no reason she wont start , i put the choke on ,pulled a cpl of times until she catches then take the choke of and next pull she will fire up , firstly i thought i had...

i have a ms 180 chainsaw that wont start , i have changed the fuel , sprk plug (Nice healthy spark) air filter but she wont start , i even tried it with easy start but nothing shes not that old about a year and i only really have her as a second saw as i use a much bigger one for work ...

Many thanks for your help ! i will have a look and let you know like i sai i have a paslode 350 but its just to powerfull for the 53mm nails (which are the smallest you can get for her ) to make a fence with i wish they would make a paslode that you can use with smaller nails , i know...

Can anyone tell me what nails i can use with this gun ? will these fit http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150443335062 or can anybody tell me where to buy some from , i have asked my local builders merchant but they only sale paslode nails and as i have a im350 i dont need...

i have checked both batts and they are the same as my old van , transit crew cab tipper , i was hoping there might have been an inverter built in somewhere hence second bat, i will have a good look over her tomoz

Hi Mick i belive it was aux lighting ie the trailer with the big flood lights they use on the motorway at night or possibly those big arrows that are towed so . my van has two batteries ,not sure why as apart from starting the eng and tipping it hasnt a need for the extra batt