Search results

Yes. Will move curve back to 1. Still on fixed speed? Not set differential pressure? No flow meters!! It's the wilo pump, esbe mix valve backing plate and not much else. Very basic. Pic attached. The ufh pump only comes on when ufh stat is calling for heat and the zone valve to it opens. As...

Yes. I will do it was set at 0.1. I didn't change it. But surprisingly, I couldn't feel much supply of heat going through it at any stage. Yes, it warmed up by conduction I suppose. But I could easily tououch it and the bridging pipework at all staged. Thanks for the advice.

Sorry. Not a full explanation. The hot water tank supplies only a second shower upstairs. Oh and the basin that's it. Downstairs bathroom and kitchen sink off combi.

Evening. Father in law had an extension, this involved a extended single storey rear ext, approx. 4M x 4M heated by UFH. A new boiler (Vaillant Ecotect Pure 825. No real idea why he accepted a combi, when he has a tank and solar which surpluses to hot water tank immersion, but moving on...

If its a combined system and feeding into foul system it needs a trap.

Ok. If you want more feedback a larger builder audience on the damp issue, tanking etc. You may want to ask mods to move the thread to the building section.. Or cease posting here and start another focusing on the building aspects once the drainage pipework and gully issues resolved.

Yes, ok. Well your doing the right things as far as confirming likely culprits on drainage and water and heating pipes. And you've found one repair necessary. If the rubble, or even worse (plaster debris) is wet, in the basement, it will or can hold water against walls. But 60cm below the...

Ok. I see. So your damp problem, internally, is a long way from the gulley, downpipe and angled Garden Wall abutment? 1.5 metres is not so far.... If that's the case. Forget what I've said for moment.... unless of course some tanking is moving the problem along way from origin... If the...

I only say this to try and help. Take it or leave it. Obviously, if the gully is leaking (looking at your photos I see some water at the base of the old basement door aperture - it should be repaired. But that is some void in there and the water will be dropping to the bottom of it. It has a...

Roku 4k stick on a 2010 Sony 40" TV. It transforms the experience totally.

I only know the fernco type adaptors. I've used a couple in my time. Seem pretty robust. I guess eventually they will crack but they are used very widely. You need to measure outside circumference like with a string or flexible tape measure, convert to diameter. Usually 120 to 130mm range...

Yes, I am referring to the tv metering. I have no idea what their baseline for 100% is so 30 or 40% remains a bit meaningless. As mentioned the loss on the 30M run is around 8db (calculated) not metered. and a 4 way passive splitter (if I did not use amplified) would be 7.5db each output. So...

Hi again @winston1 all really helpful and practical. what i havent given you is the location, signal strengths etc for the muxes from crystal palace at the site. But they are in Farnham and 35 miles from crystal Palace transmitter as the crow flies. Coverage map suggests inside good coverage...

Hi @winston1 . Thanks so much for reply. Ok. So that sounds high, right? Why is it so high? Why is it not made with a more moderate level modulated signal output that would align better with terrestrial digital signals? If it is overloading, why does it not appear to cause any issues when used...

Hi. At the inlaws house. I set up a newly purchased Techmate HDMI modulator with 4k pass through. I also ran coax feeds using webro wf100 to 2 other rooms. Previously the aerial, a Fracarro Periodic Log fed one point only. I introduces a labgear LDL204 for this purpose as one run was nearly...

@GalaxyGuy thanks for the details. Very useful. The vmod and self monitoring does sound interesting. How hands on do you have to be to diy the monitoring and bypass adt? What does the keypad app do? - use the keypad remotely by phone? To arm / disarm etc? Can you see codes and status show on...

Good evening. Have a ADT branded Galaxy G2 alarm which is paid for. Still pay for their monitoring monthly service. As a part of full fibre broadband install, we are losing the PSTN copper line the alarm communicates with ADT centre on. Called ADT, they said the only option is to upgrade to...

Mitsubishi, in the owners manual suggest using their ftc5 control panel to use dhw to constant. What is not clear? 2. I'm not asking for any flow temperature greater than 50 or 55c. They shower at 38c. 3. The duration. Is shower duration before you cannot shower any longer at 38c. No it...

Thanks for the reply. Lots of data. But is 12min with dhw active vs 18 min with it deactive. And a mfr recommendation to run dhw on constant not enough?

No takers? The Mitsubishi pre-plumbed cylinder schematic is above. Some extra info. So if using the dhw whilst dhw on constant or timed on whilst showering..: Start temp, Duration, end temp 55C, 12min, 27C If using the the dhw so it is off or timed off. Start temp, Duration, end temp 53C...