Search results

Looks like a great design, I would opt for a sloping roof for ease of access, ie maintenance. Pity you couldn,t incorporate a window into it. Regards Otto

Hi group, hoping someone can advise on best solution for my driveway. Its currently compacted mud and stone, the mud is carried in on the car tires which come down the bridle way. Will it be best to dig all the stone up and replace with new, or simply add new over the top of the existing,. And...

Thanks for the advice guys Regards Otto

I think I've sorted it, the detector housing was slightly apart, there must be a sensor within the housing. Panic over....for now :shock:

Hello group, doing a bit of decorating in our new home and the wife has knocked one of the IR sensors situated in our hallway, it set the Optima XL6 house alarm off, we reset the system but there is a tamper light lit, pressing any of the buttons on the keypad doesn’t make any difference. The...

Thank you very much for the informative and prompt reply, it makes sense now, and explains why sometime we don't get hot water for the shower. Regards Otto

Hello group, we recently moved into a property which has oil fired central heating, the boiler is a Worcester Heatslave 26/32, we've never had oil before and were just seeking clarification on an couple of issues regarding the hot water advance function. Firstly, is it more economical to have...

Hello group, I recently installed a multifuel stove. I would appreciate any comments prior to inspection so I can get it right, the stove has a 6" enamel flue which goes directly into a 8" clay liner. I will be sealing this with multiple winds of fibreglass rope finished with a fire cement. The...

OK, will get thicker rope tomorrow. Will I need a clamp, the distance between the enamel flue pipe and where it enters the clay liner is approx 9", there isn't much room for movement. And will I need to get the fire inspected prior to fitting or can I take photo's and leave until its finished...

Hello group, I have recently fitted a multifuel stove, the 6" enamel flue slips inside a 8" clay liner, to seal the gap between the liner and the enamel pipe I was told that you can use rock wool, then seal with fire cement. I filled the gap initially with 9mm fibre glass rope, but its not a...

Widening to accept stove

After