Search results

You certainly have mate, and mucho thanks for that!

What kind of flue is it, i.e. precast, masonry, gas?

Yeh anno!

Hi group, my Mother has a thermostatic bar mixer shower valve fitted, the hot water is supplied by a worcester combi 24i. The shower works fine, then it goes cold, there is no pattern to it and it will become warm again on its own accord. Domestic hot water and the central heating appear to be...

Relay was fitted, boiler has been fine since August 2016, have a problem with the shower now but that's a different thread, thanks for all your help guys, much appreciated. Otto, in a soaking West Cumbria

Thanks for the advice AGAS, was under the impression that I could work on the domestic water side of things, but I will heed your warning. Much appreciate all the help offered by all. Otto in a damp West Cumbria

That's great thanks for that, will I need to isolate the water, if I do can someone point me in the right direction. TIA Otto

youre right Agas, thats the beauty of having three kids with houses and another three rented. Can anyone supply me with a picture or a part number for the item I need to replace. Thanks again group, your knowledge is invaluable. Otto

I've removed the actuator/motor, I thought there would have been an O-ring seal but theres nothing. Do I need to order a replacement motor as shown in the picture, or is it the valve that I need. TIA Dennis

Thank you. So is it a direct replacement, or have they changed the coding

Hi group, my son’s Baxi Neta Tec Combi 28 GA has developed a leak, I believe it is coming from the pressure sensor valve but I stand to be corrected, can anyone advise on a fix for this. Pictures supplied. TIA Otto in West Cumbria

Thank you for the advice, does seem a little pricey. Does anyone know the part number for the check valve, probably be easier if I just change like for like. Still working, Otto!

The left hand check valve HAD seized, I had to remove it and poke about with it before it came free. Alls well now and boiler has been re-pressured. I've seen a similar set up with braided hose, could i replace these for a braided hose to alleviate further troubles. Thank you for all the advice...

Thank you for the response, could you identify the check valve from the attached picture? Regards Otto

Yes it has a filling loop (I think) 3 black valves on the rear, all open. x2 black knobs on the front ofset to the right. these are closed. opened them but nothing happens?

Hi group, I have a back duo-tec which I can't depressurize. Tried following the guides provided on the site & you tube but to no avail. Any combination of the valves doesn't alter the pressure. Can't hear any water flowing through the system. Any advice appreciated, regards Otto

Thank you so much for all the advice guys, the pro's came out within the hour, stripped all the wiring out and renewed, job is sorted. Would like to upgrade the consumer unit in the near future as it's quite old. Thanks again guys, Otto, in a starry West Cumbria

Thanks echo, much appreciated..

Hi group, a property I rent out has a loose connection on the item in the photo, it appears to be the left one with the black tape on it, it's crackling and the lights are flickering, the unit is sealed, it sits next to the electric meter. Obviously it needs fixed asap, what I'd like to know is...

Update: Primary thermistor replaced by my local gas man, all has been well for the past two months (y) Thank you all for your valued help. Otto