Search results

  1. P

    cobra scarifier S40c how to oil change

    The 10mm plug has a flange socket to large to fit a socket without removing the front tray. So I resorted to using this below, it work a treat measure the oil that was suck out so I know there was none left in sump maybe some that did not drain to the bottom. Next time I use it and it's...
  2. P

    Apple varietie

    Attached photos of apples in garden long shot anybody know what varietie apple this is ? Sweet,not crisp, not a keeper.
  3. P

    Topdressing calculation

    SXTURBO My Lawn looks like yours at the moment , waiting for it to dry out then going scarifier with the metal blade fitted
  4. P

    cobra scarifier S40c how to oil change

    Thanks. The Filler front hole higher, That must be why the oil just pours out when you remove the front dip stick, I will measure what I put in as not to overfill.
  5. P

    cobra scarifier S40c how to oil change

    Thanks I now see the plug , why has it a rear dip stick ?
  6. P

    cobra scarifier S40c how to oil change

    Hi John Front and rear plugs have a dip stick attached. No other plugs viable John
  7. P

    cobra scarifier S40c how to oil change

    cobra scarifier S40c how to oil change ? I can see the oil filler at the front of the machine, Can you just tip it forward to empty the oil ?
  8. P

    Getting the lawn back

    Mine is just the same looks like a beach scene. I plan to aerator with the metal blade scarifier to cut cuts in lawn not the wire type rake up and then leave until spring. Then weed And Feed.
  9. P

    Topdressing calculation

    If it was me I would cover with one inch of your mix & scarifie/ air rate in the spring then a weed & feed before great growing season.
  10. P

    Topdressing calculation

    What top dressing are you going to use ?
  11. P

    Fighting Block Paving Weeds

    I also use Gallop , purchased on line. Best stuff I have found for brambles, sting nettles and the like. I think I mix it a bit strong but it does the job.
  12. P

    Oleo mac Strimmer problem

    Mr B will be along soon I'm sure he will point you in the right direction
  13. P

    Stihl Hedge Trimmer grease.

    Great thanks John Fed up with paying Stihl prices for tubes of grease
  14. P

    Stihl Hedge Trimmer grease.

    Tried 10mm nipple it fits, suitable to pump in grease then return to blank plug. Would this grease be Ok the the Stilhl
  15. P

    IZY blade nut sized

    With an 3 foot extension on a 14 mm Hex ( thanks LTL) it broken free phew the person must who did this up be in the Olympics. My impact wrench would not budge it ! Will now get a set of these Have a choice ?? any suggestions for general DIY 3725 has these Sizes: 10, 12, 13, 14...
  16. P

    How can I cut Leylandis?

    Best suggestion. when they are gone for good. Have cut down and got rid of 40 plus 12 feet high on our garden.
  17. P

    Bosch GDX18 200c

    Tried to put on a normal 1/2 ich socket seems the chuck is just to large to aspect this socket, would the socket set above be able to fit this chuck ?/
  18. P

    How can I cut Leylandis?

    As Munroast says Bow saw, maybe some different sizes depending how thick the branches , and goggles. If you use a ladder or step ladder make sure its safe to use maybe a second person to foot ladder,
  19. P

    Bosch GDX18 200c

    Been given this now Looking for HEX impact sockets for this Bosch 18v 200c , any help where I could get them, thanks
  20. P

    IZY blade nut sized

    Are the battery Impact wenches any good ? seen aldi and lidi ones on line
Back
Top