Search results

Thanks Cannot get any access behind the appliances/cupboards having large pull out storage drawers. Access to the rear of this part of the cupboard means emptying the storage drawers and lift out.

Having had a new kitchen fitted some years ago by a high street DIY center. The kitchen and dining room were knocked into one room with new units and appliances etc. Recently had the Dishwasher service engineer called in for a problem. The dishwasher and washing machine are side by side and...

In Canada they are half the Amazon price and on top of that with the exchange rate, cheaper still.

Yes thats very similar. Alot neater than mesh curtains etc and tapes etc everywhere. Thanks

Having returned from a trip to Canada and seen they use Aluminium framed Window and Door screens. These are light and robust, and easily fitted or removed when needed, also easily repaired. Anyone know if any company supply these kits in the UK. Example...

To drill holes using a petrol auger post borer. For 4" posts, should I use a 150mm or 200mm dia, setting posts with Postcrete.

OK Found the mix must be a min of 10:1 (1 part seaweed to 10 parts water)

My ceiling in the bathroom as in most rooms in the house are Artex. I want to move 2 or 3 of the 6 downlights in the bathroom to improve the lighting in certain areas. I was going to drill with a hole saw for the new position of lamps and use the plug to fill the old holes. What could I use...

I have a container with Seaweed collected last year after the winter storms and has been composting for in excess of 8mths in water. I've read somewhere the mix for bushes and general approx. 1 part to 3 parts water, but for lawns would it be the same or weaker. Or is that still too strong a mix.

Thats my main worry, the weight.

Currently have a corner shower (900 x 900) with a fixed panel and a hinged door and on a raised Acrylic tray. The tray and shower having been in use for some 10 years with no issues of movement causing leaks around the tray edge sealing. Thinking of replacing the shower panel using a glass...

Around all the rooms and hall etc over the years I have fitted Plaster 100mm coving. Now I want to do the Bathroom/Shower. As it can be a damp and warm environment with shower etc.. Which coving should be used, Plaster or Polystyrene. Also once fitted, with what/how should it be sealed...

This is the fence in question, as said earlier it runs down the center line between the 2 properties and having tried to explain it a plain panel fence where the panels could be purchased at any garden center or high street DIY store. Although looking not too bad, the 3" posts are rotting at the...

This what I'm ****ing trying to find out who owns the ****ing fence as its not in writing or seen like a picket fence.

If you read what I've said. The fence is made up of overlap fence panels and a post each end like a normal garden fence !!!!!!!! how do you see the front or back of bog standard fence panel ????

Both the posts and overlap panels run down the center line of the stated boundary line dimension on the plan. This fence or boundary is not marked with 'T' on either side or mentioned in writing to define the responsibility.

thanks, The fence is made up with panels with posts which the panels are nailed/screwed to. As for the 'T', the plan shows all the boundaries for all the surrounding properties. The 'T' is shown for 95%, boundaries and outer perimeters to fields and public right of way pathways etc. Some...

My property looking out to the back has a wall to the right and fence to the left. The fence to the left is in disrepair and needs replacing. Its been there since we moved in some 20 years. The deeds/plan say/show that the wall to the right has a 'T' on my side of the property. But for the...

Noticed in certain areas recently fitting Eaves protectors, the Tile underlay of 30 yrs is rotting from winter frosts etc. approx. 300mm from its edges to the gutter. The battens appear to be dry and ok. Which underlay is best suited to replace the rotting felt to work with the eave protectors...

Erecting a 6tf feathered edge fence onto 75 x 47 rails x 3. What sort of distance is it desired to have the rail from top and bottom of the fence. thanks