Search results

I am hoping to convert garage into living space. Is it OK to use 6x2s as floor base with plywood on top or should it just concrete floor?

Never placed order in the end but Sofology shop has now opened in NI.

Thanks for the advice will install them, fire heating up with all rads of bar the one not working then work back to open them all up.

So fit the Flamco valves on flow and return on the new pipe work? The highest point does it mean furthest point from boiler or pipe in loft? Also as the flow/return has 5 rads t'ed off at what point in the pipes would you fit the air valves after first rad or before last rad in the run?

So do the high volume bleed is what your suggesting? Do all rads need to be off with the one working on to be bleed?

Ok

Pressure is 1.2 when heating not on then 2 when heating is on that OK?

How do I do that?

Tried this and yes radiator that wasn't heating did heat but when all back on again went cold. How long do you have to leave the not working radiator open for?

That's the radiators I have installed

Would 2 of these on the flow return resolve the issue? Flamco Flexvent R½" Automatic air Vent, Radiator air Vent, Boiler Airvent Valve 27740 https://www.amazon.co.uk/dp/B00GXNNGPY/ref=cm_sw_r_apan_i_HX003BNGJVR0PR2C183G

I meant to say the flow pipe along the loft is hot but return is cold, air in system??

Main flow/return is 22mm I have took 15mm feed of it.

Hi I have installed new rads with pipes running across loft then down walls to rads. I took feed of 15mm flow/return and t'ed off for each rad. The first rad is heating up fine but rest are not. Pressure is at level on system and I have turned other 4 rads off unscrewed valves at top of each...

So this stuff Pipe Insulation Lagging Wool Felt Wrap (Pack of 3 Rolls) https://www.amazon.co.uk/dp/B00B9FBA40/ref=cm_sw_r_apan_i_P03EY2BQDVM7RJBA6W30 And do I just scrim tape over the lagging before plastering?

Hi I have chased 15mm heating pipes down walls from loft for new rads and are buried at least 10mm. The foam insulation would be to thick whats the next best thing to insulate with thermwrap, old style lagging? I intend to plaster a finish coat over them and want to avoid cracking down the...

Hi I am adding 5 new rads to my heating system. Current rads are mircobore which I will stop end as the new rads will be off the 15mm flow/return pipes that had been added due to a new rad being installed before I bought the house. Can I just T off the flow/return run pipe to new end rad then...

By the way this system used to be gravity fed when heating on both rads and water heated but new boiler upgrade and heating now zoned and pressurised that's why amendments had been made would this have any bearing on balancing the water cylinder as heating now should only be heating water when...

Ok thermostat set to 60 and valve turned down to see how that fairs out.

Yes it does set at 70