Search results

These arrived today and fit perfectly. Good shout, thanks!

Thanks. Maybe... It would need to go into the rebate, and somehow secure there.... Rebate is 10mm wide....

I've got this metal curtain track but no wall brackets for it.... It's 22mm high, but is smooth backed, so the bracket pictured will not work.... Any ideas anyone? Thanks!

That looks really good! Do you know what timber it is? Last time I bought scaffold boards they were softwood

The missus has requested some shelves in the new laundry.... Both below the worktop and on wall..... Usually I'd do painted mdf or birch ply, but it's an old house with some exposed old oak lintels around..... What timber could I use that wouldn't look out of place? Thanks!

Ah, I can put perm live into grey? I assumed I had to take the switched live from programmer... Otherwise programmer defunct, no?

Thanks for all input. The programmer is a EPH R37 and thermostats are EPH Cp4m. My heating /DHW system is an S plan +. That is, there are 3 x 2 port valves - one for DHW, one fir radiators and one for UFH. I installed the R37 so that I could control the time of these. I then have, so far...

I've messed up and only pulled a 3 core & earth to location of wired programmable room thermostats. This means the there is only power to these when the main programmer is calling for heat in that zone... Annoying when you want to make a change at the thermostat when programmer is off...

Thanks both. It's an EPH Cp4m - time programmable - I hadn't considered setting programmer to be always on! Thanks!

I only pulled a 3 core & earth cable to the location of digital room stat. I've come to wire it up and now realise the device will only work when programmer is sending a live to it. Should have been 4 core & earth, right?

Just firing up to bleed oil line, so only a few seconds. ....

Is it safe to test an oil boiler burner before there is water in flow and return? Ie/ when it's dry? Thanks

Thanks. I think I'll put an extraction duct down the chimney, and leave to open to the void for some natural ventilation.... As in, block the chimney off to the room itself, but open it to the subfloor.... Now, which extractor? It will need to run nearly constantly, and the duct will be...

I have a room with a supended floor in a corner of the house that is subterranean. The public highway outside, built up higher and higher over the years, prevents me from lowering the outside ground levels. It is therefore difficult to ventilate the sub floor. I have so far put in some...

I just meant that having only one retaining bolt seemed a bit odd. I'm completely unfamiliar with these boilers.

:)

It's a Grant Vortex Pro Utility boiler, with a Reillo RDB burner...... Seems odd that it's only held into combustion chamber with one bolt at top? Presume there's supposed to be a gasket on flange? All a bit shoddy in my view!

Thanks both. It is indeed a Grant Next question..... the rope seal where burner fits into hole - what's different about a Grant part for 30 quid, and a peice you'd use on a word burner - prob a fiver max??

Glue? Flue!

Is it good practise to put a bead of silicone (high temp?) where the glue connects to top of oil boiler? Thanks