Search results

  1. M

    Pipe and elbow wanted for kitchen sink drainage

    do you know what size i need?
  2. M

    Pipe and elbow wanted for kitchen sink drainage

    are you saying i need to add glue around the pipe before i compress it into the trap
  3. M

    Pipe and elbow wanted for kitchen sink drainage

    Greeting! Have one of these https://www.screwfix.com/p/flomasta-round-p-trap-white-40mm/590jn It say its 40mm. however my outside pipe diamitor is 44mm and its slack and wont compress in the compression fitting! Also have one of these...
  4. M

    2X leaking taps

    are you paying for them?
  5. M

    2X leaking taps

    on TAP 1 I took the blue cap off and unscrewed the acrew. But it wont shift! I mean the top of the tap will not come off by threading it or pulling on it on TAP 2 the head on the screw is in to bad of a condition to take a screw driver
  6. M

    Drainage kit wanted for domestic sink

    yes something like that. do you know which ones will fit my sink please?
  7. M

    waste pipe over flow fitting not the same size

    I got that one and fitted it thanks! But have another sink that needs one. That link you provided to it dose not seam to work anymore or is something ells
  8. M

    2X leaking taps

    TAP NUMBER 2
  9. M

    2X leaking taps

    TAP NUMMBER 1
  10. M

    2X leaking taps

    So taps on the same sink, but bough have leaks Can they be repaired or need replacing Thanks
  11. M

    Drainage kit wanted for domestic sink

    Hello again! Picked up another old house hold sink again. This time no tap or drain thing just the shell The whole is about 2 1/8" diametor and the outer grove is about 4 7/8" What can i get to thread into it please? Thanks
  12. M

    waste pipe over flow fitting not the same size

    dont worry about it! i have cut it off with the grinder
  13. M

    waste pipe over flow fitting not the same size

    How do you remove it?
  14. M

    waste pipe over flow fitting not the same size

    there is no screw there
  15. M

    waste pipe over flow fitting not the same size

    looks like my sink is leaking! and leaking where the bowl thing attaches to it. It is loose! How do you tighten it? or remove it for another one please?
  16. M

    fitting needed for tap font to sink

    looks like it all do the job, just wanted clarity Thanks!
  17. M

    fitting needed for tap font to sink

    I found this one. do you think its the same? https://www.showerspares.com/search/bristan-tap-fixing-kit-1z01029nt/?gad_source=1&gad_campaignid=20422347784&gclid=EAIaIQobChMI3pPironvjwMVi5tQBh1svgASEAQYEiABEgL0L_D_BwE
  18. M

    waste pipe over flow fitting not the same size

    got loads of those sink ends laying around will buy to try though. thanks!
  19. M

    what flow ratio is this water heater

    Good guide that you have there of winter 1.23lpm and summer 2.15mpm But are you sure about its maximum temperature of 48C. Do we need 56C ish to kill bacteria? is it not SOLD AS a "hand wash". Looking at a Health and Hygiene point of view that is
  20. M

    what flow ratio is this water heater

    Sorry let me rephrase it. "What is the flow ratio with maximum heat"
Back
Top