fitting needed for tap font to sink

[muckington]

Hello!

Have a standard size/ type domestic kitchen sink. And I have a duel pipe tap that i wish to fit. but need the correct fitting so it will bolt on. please see the photo below


Thanks

 

[Hugh Jaleak]

You have there a Monobloc tap, to fit a single tap hole sink. If you wish to use a Deck Mixer with two inlets, you'll need a two tap hole sink. Otherwise fit another Monobloc mixer.

 

[JimCrow]

Tap Fixing Kit 2 Hole

 

[muckington]

You have there a Monobloc tap, to fit a single tap hole sink. If you wish to use a Deck Mixer with two inlets, you'll need a two tap hole sink. Otherwise fit another Monobloc mixer.

pass! dont understand any of it

BTW went to screw fix and could not help

 

[muckington]

Tap Fixing Kit 2 Hole



View attachment 393567

It says mono on that. though mono was singular and not plural. but there is a hot and cold feed inlet (=2)

 

[Harry Bloomfield]

It says mono on that. though mono was singular and not plural. but there is a hot and cold feed inlet (=2)

Monobloc = single hole through the mounting surface, with both H &C pipes going through that single hole.

JimCrow, has provided a link above, to what you need, to mount that monobloc tap, to your single hole, in your sink.

 

[muckington]

JimCrow, has provided a link above, to what you need, to mount that monobloc tap, to your single hole, in your sink.

I found this one. do you think its the same?

Bristan Tap Fixing Kit | Bristan 1Z01029NT | National Shower Spares

Buy a brand new Bristan Tap Fixing Kit (Bristan 1Z01029NT). 30 day money-back guarantee and same day despatch.

www.showerspares.com

 

[jj4091]

Probably.

 

[muckington]

looks like it all do the job, just wanted clarity
Thanks!