Search results

Hi, a bit of a story but here goes. problem with hot water going to rads when CH was not on, and water temp was sometimes not great. indicates a diverter problem? the boiler guy changed it and it worked for a few hours, then the pressure went to almost zero, I topped it up to 1.5 via the tap...

"Try googling the manuals library". Can you put that in idiot-speak for me :), Thanks

Tony, thanks a lot for your help. I got a Corgi guy in this afternoon and he said the gas valve is bad. He also said he needs an instruction manual to be able to easily fit the part. Anyone know where I can get one of these for a Glowworm Icon 23T boiler?

Thanks for that! I tried turning off at the mains and putting the bar up to 1.5. The symptons have changed a bit. Now when I turn the hot water tap or the heat on the fan starts up for the flue, and there is a rapid ticking sound, sounds like it is trying to throw a spark to ignite the gas like...

Hi there, just back from a weeks vacation and we have no hot water. (the bar was low so I added water with the black valve, it then went too high so i released water from a couple of rads, it is now just over 1) the boiler is trying to kickin but the usual gas fireup sound is not happening. i...

yes, it does come apart if you push on the small button in the center. then put the two wire ends in the respective slots and snap it back together. thanks

Hi again, thanks for the help. Did the multimeter test, and it ended up being the fuse was blown in the plug. DOH! It must have blwn when replacing the door interlock becauseit was a good fuse. ???? Now I'm replacing the door gasket\seal. Having a problem fitting the retainer ring on the...

Hi again, thanks for the help. been away for the holidays so late replying. i replaced the door switch/interlock and no change. then took the timer to a local shop and they visually inspected it said it looks fine. no holes visible in the rubber door boot. ???

the button has been pressed in and out so many times I am afraid of breaking it :). But it does click on/off when pressed, and the picture on the machine shows that out is on?

Hi, we just moved into a new (old) home and part of the deal was that the washer\dryer remained. It's a Hotpoint WD61, and we cannot get it to work. The vendors swear it was working when they left, and the soap tray does look like a wash was done recently. Tried the fuse that is in the in the...