Search results

Sorry for all the questions, but we only have Currys in the town who have very limited tech knowledge. We currently have sky using our own dish with two cables. We want a small TV in the playroom for the grandchildren that we can play Netflix on as well. If I buy a smart TV with Free-sat...

The on/off light on our samsung built in cooker has never worked - now 3 years old. Model number BQ2Q7G078 The cooker works absolutely fine, except the failure of this light to come on. We only realised recently that the light should work, but Samsung don't want to know. The appliance came...

Thanks - will call the electrician first as we weren't told we had to register for the ten year guarantee - Cheers

My electrician fitted eight of these in my kitchen ceiling two years ago and two have failed. How do I change the bulb?

Thanks but no - always cracks off and doesn't look good

Our central heating has grey 10mm pipework. I found some 10mm pipe sleeves but now they seem to be out of stock everywhere. I have tried using 15 mm but they don't work as well. Any ideas, please? Cannot take up the floor and fit 10mm white pipe, by the way.

Sorry - I am the landlord and rent out the flat via a letting agency, who hold the gas certificates. They have stopped using the previous gas fitter as he was unreliable. I have found another engineer and will probably get a second opinion.

We are landlords of this property and use a letting agent. He told the letting agent that he used his discretion in not turning off the appliance.

Warning notice says - AR Flue terminals not correct clearances - discretion used

Ok, so now I am really confused. The Engineer has stated that he has issued a warning notice and used his discretion to allow the temporary use of the appliance. His test figures show passes for flue operation checks. What is my position now - could he come back and disable the appliances...

Thanks all - I just don't understand why this wasn't picked up before, when we have had three engineers over that time we have had the flat. Engineer is quoting around £1500 to fit a Baxi Duotec24 ERP. Just have to swallow it I suppose! Thanks again to all who replied. Cheers

This picture shows the position of flues from my two boilers (heating and hot water) as well as a vent. Our new gas engineer says this is illegal (not enough space between flues) and we need a new combi boiler as re-positioning of the water heater flue is not possible. This was a purpose built...

Can anyone tell me where to get this black connector please? I assume if you click on the link, you will see what I am talking about! Cheers Bazzer http://media.diynot.com/208000_207722_89115_44528725_thumb.jpg

pics to upload

Is it right that if an extension was built prior to 1992, then building regs and planning permission has no bearing as it was done over 14 years ago? I know it should still be checked, but is there any danger of local authority or bearded conservationists can cause a problem for us? Not in...

British Gas came today. Took the engineer 5 minutes to sort out the problem (hot water pressure switch) I paid my plumber over £300 for previous attempts - still have an outstanding invoice from last attempt of £120, which I will not be paying. He suggested I get an engineer from alpha...

Thought i put model in the header - sorry Alpha CB24. He has changed that switch. I have put this as a separate item on the forum as apparently I am not supposed to hijack other posts

Sometimes fires up, sometimes not. Not always on the same tap, either

Thanks, but he has changed that too