Search results

I fitted an RW1 Gliderol motor to each of my garage doors and they worked fine for about 10 months. Sometimes when i close them now they are auto reversing as if they have hit an obstruction which is how they are supposed to work if an obstruction is actually present. I've tried turning the...

Thanks for your help, I've reduced the temp now. I did have a copy of the installation manual like the one in your link but i was looking for a user manual but it seems that they don't exist. It was set at 60 degrees so i reduced it to 55. I'm now going to check the temp of the water at the...

Can anyone tell me how to do this as my donlnestic hot water is too hot. I can see 2 temp controls when I remove the plastic cover but just want to be sure of the correct procedure as I'm not familiar with this type of system, thanks in advance.

I'm thinking of installing a water softener in my house as our water is circa 440ppm. I've done a bit of research and it looks like the better softeners are the ones that use resin combined with regeneration using salt. My only concern is that this obviously puts salt into the water which I...

Thanks you for all your useful posts and informative replies, I'm impressed to say the least and appreciate all of them. In regards to the various options on voltage I'm not that clever in this field unfortunately so cant really comment. Thanks again everybody, great forum.

I'm thinking of buying an illuminated house sign as no one can ever find our house number when looking from the roadside at night and the house number configuration in the street doesn't help! The sign I'm looking at has a plug in transformer to reduce the voltage. My question is would it be...

That's fantastic andytw, on closer inspection it is a Q rather than a 0, my eyes aren't what they used to be! I'll now be able to get this sorted, you've been a great help mate, thanks again. :D

Hi andytw, Thanks for your ongoing help, I do appreciate it. 1st one is marked N, 2nd one as you say is L (which has a link wire to the 3rd connection) and the 4th one only has a number which is 014.

Yer, the new one is battery powered. The existing one is a Siemens RDE programmable thermostat. That's as much as I can see, there's nothing else written on the unit such as a number.

The current one is an old programmable room stat but it has three wires connected to it, brown, grey with a blue sleeve and black with a brown sleeve. The brown also has a link wire going to another terminal in the existing thermostat. (photo of existing stat below) The programmer I...

moved

thermostat

Hi, my house has two separate heating zones, one for the ground floor and a second for the 1st and 2nd floors. The ground floor thermostat had two wires going to it and I have successfully changed that thermostat to a programmable unit. However, the thermostat for the second zone currently has...

I think it is but not sure to be honest.

Yer, its in the garage. I'm thinking as it only has a stat in the fridge compartment this has shut down with the recent cold weather, would you agree?

My freezer has stopped working on my Bush fridge freezer, is it possible to repair this or is it not worth it. Any help would be very much appreciated, cheers.

Thanks again John, its a transformer as its identified on the distribution board and there is a small transformer next to the DB with a chime above the entrance door.

Wow, I have been away for a few days and just checked my post, I’m impressed with the quality and speediness of the response, thanks to you all, what a great Forum, thanks guys. "That depends a bit on the nature of the 'bell'. If it is such that it would not 'sound' if the few mA need to...

Hi all, my first post so be gentle on me. I've viewed this forum many times before and now find it my 'go to' as its a huge help so I have joined up. I want to upgrade my existing plastic cheap looking door bell push to the one in the link below. The existing wiring on my bell push is two...