Search results

  1. C

    Removing unused gas fire flue liner (no chimney stack)

    It should stay till fire capped off,it will come out easy enough it’s only a twist fit after tape removed.better removing completely as it will probably rain in slightly through the terminal
  2. C

    Temporary method for privacy

    Windowlean
  3. C

    loud noise and pipes vibrating when shower is on

    Possibly the ball valve in your cold water tank, be worth trying for the price of one.
  4. C

    Old lock shield valve

    Remove the brass top ,get some ptfe tape make it into a string ,wrap around the shaft and reffit the cap
  5. C

    Help identifying where Greenstar 30i bypass pipe restrictor fits please

    If I am correct it’s install on a pipe from left to right manifold,( lot of years since I did one)
  6. C

    Worcester 24i Mk III Re-pressurising

    The screwdriver slot just above the silver flex , possibly one on the other end as well
  7. C

    Changing Copper Olive on TRV

    Right to left to undo.have you tried tightening ? You will need to drain or drop the pressure to work on it
  8. C

    Wet UFH with LVT, efficiency

    I have karndene and its excellent
  9. C

    washing machine hose blanking connector

    Yes 3/4 BSP cap fit on the tap ,don’t forget a sealing washer
  10. C

    Shower going cold

    Check mixer taps for passing, this will cool the hot water.
  11. C

    sandstone walls and mounting satellite dish

    Resin and threaded bar
  12. C

    Shower valve 200mm pipe centres

    Think Mira do a adjustable one ,
  13. C

    Small projection radiator

    Nothing stopping you altering the brackets to suit. Plumbcentres own brand are quite narrow
  14. C

    Fagor feb20e boiler issue fluctuating hot/cold

    Probably a scaled secondary heat exchanger, but it needs some one todo test to prove it.
  15. C

    Need a smart thermostat for Vaillant boiler

    Plumbcentres own brand one is excellent £50 ish
  16. C

    Radiator manufacture identify

    Possibly centrebrand plumbcentres own brand
  17. C

    Slightly blocked inlets new mixer

    High or low pressure system ? 15 mm ok on high
  18. C

    Mira Platinum Valve & Controller flow restriction?

    If it’s the one with the app ,it says factory setting is12l lpm adjustable
Back
Top