Search results

Thank you...Something similar, same principle.....but our's didn't have a platform, just the small box.

In the early 70's I worked around Leeds erecting Street lighting. The Poles would already be in position, so we would just slip the lighting unit onto the pole and tighten it up. We didn't have hydraulic lifts like today. I seem to remember it worked on cog wheels. On the back of the lorry...

Yes, it was switched off. Stupid of me not to have seen it. Thank you very much for replying.

About a month ago British Gas fitted a Smart meter. My EDF FIT meter was working fine up to then. A week after I noticed the FIT meter was not working. I assume the engineer disconnected it to do his work. What needs to be done. Have contacted British Gas but still waiting (3 weeks)

Yes, the old regulator seemed to work better, but the plumber turned up with this........... I'll keep a close eye on them... Thanks

Understood, thanks.

So me moving the Lever has no effect?

I have closed off the 2 full Bottles on the right. So it is indicating that the 2 on the left are empty....they are not, I am still heating water.

Sorry, have posted in 2 places.....

Yes, but the problem is ....they are not empty. I am still heating water from the 2 bottles on the left

Had this fitted about 3 months ago. I was told when "Red" appears I was to turn the Black handle the other way as 2 bottles on left were empty. I forgot and after a while I noticed that I was still getting hot water. Closed the valves on the bottles on the right, and am still getting hot water...

Had this fitted about 3 months ago. I was told when "Red" appears I was to turn the Black handle the other way as 2 bottles on left were empty. I forgot and after a while I noticed that I was still getting hot water. Closed the valves on the bottles on the right, and am still getting hot water...

Thanks but what is the filler for?

2 years ago, it's been a disaster. The Knots started appearing not long after. I gave it a good rub down then Primer. I used a water-based Primer...wondering should it have been oil. They are old gates.

Painted these gates a while back and have noticed these knots. The paint won't stick. Used a good German Primer.

Never thought of DPC...good idea. Thanks

I've had a shed in this space for a few years. It rested on soil with concrete lintels for a base. I dismantled it to have the driveway done and now I have a good solid base for the shed. I was planning on laying Pondliner, shed on top and the liner tucked up about 4cm on the outside back &...

I can see the problem, Leaves have gathered all around the Bottom of the Shed and are conducting water into the base. I usually keep an eye on that sort of thing. Once I have cleared everything & it dries out can that mould be treated?

Found this in Shed Corner. I assume it's Mould. Any ideas on how to treat it?

Found this in Shed Corner. I assume it's Mould. If so ho do I get rid of it?