Search results

Hi chaps, Anyone know what type of hinge this is to replace? its a male to female slide in...thanks

Thanks all much appreciated, I will be getting an electrician at some point soon to replace the older fuse box but as the cooker is gone and not being replaced the wife wants the fridge freezer there instead, so hence the ask to use the cable for a double socket there, and given advise I can go...

Agh great EFl thanks for quick response, no cooker going in we use air fryer and a 2 ring normal induction unit, cookers just done need anymore, I will stick a double on the cable, I suppose if anything its overkill as thickness will carry socket need easy.

Hello chaps I have a old socket for old cooker I have skipped, see attached its the thick I think 6mm cable to the right, the other cable to the left is just a feed from there to the hood so dead unless I connect underneath for another socket above. Question is can I use the old thicker cable...

Didnt know I could varnish chipboard? you mean this stuff...

agh thanks so all good to paint over as an interim, will seal first, whats best Latex or Acrylic, less smell the better.

So we have a front room that we have ripped old carpet off and below is the chipboard subfloor, eventually we will spent some money but in meantime can we paint the chipboard floor with say this paint... BEDEC ACRYLIC FLOOR PAINT It can look nice and just want to check I wont damage the boards...

Thanks will look into that, if you have one in mind please link :)

Agh thanks, well it gets emptied every 2 years so maybe silicon frame sealant will be the cheapest method and to redo every empty...or outdoor duct or pvc tape to bond to the concrete floor around it. I think good idea to replace with 600mm but that will take a bit of time maybe next year...what...

Crazy price man, will look at some industrial seals for old one. :)

Yea looks like it lol, its old for sure...guess I can reseal this one, any idea what kinda rubber seal I can use and cut to size...thanks

Agh thanks, so I assume the centre connection on the boxes is the output and they are both empty...so feed in and nothing out so they can all be off for now. I will check voltage think I have a MM around, maybe they were old electric rads...or something.

Hi any idea where to get this cover for my septic tank or where I can get a new seal for this one as its a bit pooey smell in garden as its not sealed down.

Hey chaps, One got only single main feed by looks and 2 others I checked in bedrooms both have 2 feeds. Not a scooby what the bedrooms are feeding or if its just a isolation fuse box?

Great all sorted the magic of plyers...thanks lads

Agh I see, so the bottom bolt on my pic I leave alone, so looks as though lever has broken off over time, will I be able to still open that? guess a new flexi needed.

Thanks Harry will take a look, close up it looks like 2 bolts to turn rather than screws.

Ok, will do and post back cheers

LOL lads what a post, interesting stuff :) well I have all off and cant see any difference...so are they isolation fuses so something blows in one room but doesnt blow main fuse just the room where it blew? I will monitor and post back if anything changes, cheers for all your great inputs...

Hi folks, trying to add water to raise the pressure after bleeding the rads, I attach the flexi pipe, I think this is the inlet although no lever looks like small bolts, maybe this is the old flexi type and the oil burner is old, just wanted to check if anyone can help point out the cold water...