Search results

My God guys... what have I started!? Er, so 0.5 is ok then???

well yeah, brekky bar/table... :)

Hi Wanted a real solid wood top.

What's the best way to get a 1.5m circular top made for a brekky bar? Ideally beech/ash/light wood. Ideally, similar depth as a work top.

oh it's only a 25sm aluminium sphere so dead light, I just liked the flex so driven by the fact it's 0.5 - it's this one http://www.ebay.co.uk/itm/270818266150?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 ?

well I've already found one - it's not HR, what's that?

oh, so 0.5 ample for normal light bulb or low energy then?

thanks, so what's a 60w bulb?

Is 0.5mm 3 flex ok for a 60w pendant? I always thought 0.75 was the norm?

Oh that's ok, I have the proper grout - this will be ok with normal sand and cement won't it? I mean, it won't react or anything?

I have a feature set of x6 195mm glass blocks set in a vertical line within a stud wall. I have ran out of the glass block mortar after doing the first 3. It was left over from a previous project and I know the mortar isn't cheap. More to the point, I only need to set 3 more. My question is, is...

Can someone please explain what the difference is in these 2 as both seem to boast the same great benefits!?? http://www.tlc-direct.co.uk/Products/VLIDSP302S.html http://www.tlc-direct.co.uk/Products/VLJDSP252S.html

Anyone know where to get actual metallic paint? I used some a few years back, got it in London - consisted of a base coat and you added actual silver powder/flakes to it but not living in London now. Want a finish which actually shimmers in light. Thx

But it's not though is it, because I've asked if there's a way to control the dimming at each switch!??

Er... what??

I wanted to fit a dimmer at one end of a 3way circuit (3 switches control the same light - currently 2x 2 way & 1x intermediate) in my hall and stairs, but is there a way of doing it so that the lights can be dimmed from all points rather than a dimmer on just one point? Just thinking, could be...

I'm buying grid switches to enable dimming so understand I need a dimmer at one point of the existing circuit which is currently controlled at 3 points. I know I need an intermediate but they come in 10, 20 or 30 amp! Which do I need? http://www.tlc-direct.co.uk/Products/VL103SS.html

Hi I want to have garden lights controlled by a switch inside, plus activate in the dark when movement detected like a flood light. But the lights are standard brick type lights so have no sensor.

Couldn't find anything then thought they'd prob have to be glued on anyway... settled for centre punching the nails and filling, much better looking! Thx

Yes, unfortunately!! Ideal situ would be to replace it but that's not feasible. It's the ceiling under the staircase so probably gets a fair bit of flexing too.