Search results

Attack? are you for real? did you not read the snotty reply softus gave? listen mate, go and read the OP, and you will see that the guy asks one simple question, nothing more nothing less... If he wanted to tell us his life story and the life story of his electrical installation he would...

you got some sort of problem mate? he asked 1 question, [removed]....and i still have the same answer..YES

Yes, you have the right idea. Dont mess with your existing lighting. Your old immersion should be fed by a 16amp breaker from c.unit, take the cable from this in immersion cupboard and put it onto a garage type c.unit, not expensive, then run your power sockets from the 16amp and take your...

As stated.. Yes to the only question he asked. These will be fed by 2.5 t+e and will be on the night time meter, probably on 20amp breakers. Somebody needs to wire these up to the main C.U in their own 16amp breakers, or if space is a premium, put all of them on one 16amp.breaker..

you deffo need an additional 100 amp supply regardless. As stated 35mm 2 core will be ideal run to its own c.unit, and a TT system at other end. All circuits on 30ma rcd.....this will cost a bomb.

yes

thanks fellas, Paul5152 thats just the jobby im looking for, any idea if i can get a chrome one?

fellas, need to install a dimmer in a 16mm backbox (wont fit)...would normally replace with a 25mm, but without going into it, this option is not possible.. Will this item give me more space to fit the dimmer into? if not, can somebody post a link to the item i am looking for, cheers all...

Gasguru you obviously dont know what BAS is like, seen as you dared to offer an alternative opinion to his.

will be freeview box, strong area i think....

fellas if i install a tv ariel at ground floor level (in a false ceiling) what sort of reception will i be likely to get...cheers

Yes, all tests come up fine ??

fellas, 1 socket circuit protected by 32amp rcbo, kept tripping. Unplugged all appliances, kept tripping after 4 seconds. Swapped for another rcbo, same again, tripped at 4 seconds later, im a bit stumped, any ideas?

fellas, thanks for your replies... rang a desk jockey in bellway, he said you can do what you like with the walls....cheers all

Hello All, I have a newish bellway home about 3 years old. It is 3 bedrooms and a loft room, a high span roof. I want to alter a few bedrooms and bathroom around a bit, all the walls on 1st floor are non supporting walls. What i am enquiring is, do engineers ever take into account studded...

thanks fattony. its not the screws that are the problem, its the old backboxes. At present i have sorted the offending backboxes, but in future i want to have these screws.. PS, i know they exist because i have used them before.

they are for back boxes, but sometimes the lugs dont take normal m3, so these come in very handy. ??

fellas, looking for the m3 screws that have the end like a standard screw and the top half is posi looking, they might not be called m3, come to think of it.

You dont know how things are with this spark and prospective client. All you did was dismiss the OPs initial enquiry with a response of what you would have done. Well we are not all trustworthy like yourself. RF Lighting, I think you have been watching rogue traders to much and have forgot...

Im glad i dont work with any fellow sparks like you. Granted i think half is too much, i take a 3rd. PS, RF, i have never been ripped off like yourself...figure it out..