Search results

Hello, I have installed an oil boiler to a property and wired up the controls according to the MI's. When I turned on the permanent live to the boiler, the power light came on. When I put a demand on the boiler from the porgrammer, the burner demand light came on, but nothing else happened. No...

I've had a blown glow plug in my VW T5 for four months. It's a bit ropey on a cold morning, but oither than that it's fine.

Hello all, I am changing my existing conservatory which has a polycarbonate roof to having a slate roof with velux windows with velux vrtical element in the walls. Looking at the celotex website there are so many products, I can't decide which one is best. I'd like to slate the roof with...

Check your DHW flow rate, if it's higher than spec then you'll need a Pressure Reducing Valve to knock the mains down to 2.5 bar and maybe a flow regulator t omatch the flow rate of the boiler. Why did you call Viessmann Tech?

drayton tempus

I'm looking to put rubber stud flooring down in my bathroom. I'f I can use one piece of sheet, then I won't need to tank the whole thing and then I'd save loads of money. The widest I've found is 1400mm, any bigger out there? Would I have to tank at all if I use 500mm tiles with Poly Eurethane...

Fit some Rinnai continuous water heaters, much less hassle and instant. As far as accumulators go, double up the accumulators for the expected draw off. Speak to GAH to get info, but also get prices from Inta. Good luck

Most boilers are expensive to repair nowadays. Most boilers are dangerous if fiddled with.

2nd hand safety critical parts are not a good idea. What warranty would you give on them, would you replace then with new if they broke? It's a can of worms....

PCB in a valve? Are you sure?

PCB in a valve? Are you sure?

check for a airlock, does the heat get around? Does it overheat quicker on hot water?

Would you have your car fixed with second hand spares?

JPC, since when are plumbers not allowed to touch lead? Speacialist? Are you a plumber? Are you joking?

Rip out an 8 year old boiler? Really?

Fit a flow regulating valve on trhe cold water inlet to the boiler. Match it to the output of your boiler (9-10l/m).

If you're not technically minded; call and engineer.