Search results

I would not take that advise as red, it will need at least 100mm from obstructions but it does not mean that you can box it in the issue as seco intimated it needs free air flow. You can create an attenuator to quieten it which allows air flow but deadens noise but it cannot be enclosed, if...

4 meters of 22mm allows for a lot of water movement hence pump activating, try fitting an nrv to the outlet of the pump on the hot side, I cannot say this will work for sure. Normally this solution is to stop hunting generated from long pipe runs after the pump. As you are aware the only...

How are you filling it is it through a thermostatic control? If you are not sure post a picture of the filling device.

Would help if you mention the model. and where it is fitted.

Camel with the hump, Richard's questions are perfectly reasonable and I think an appology would be nice as he was only trying to assist. The plumbers that you have spoken too obiously do not have the knowledge that Richard has. For an explaination the flow switches on that pump are...

They are standard o'rings you should be able to get replacements from a good merchants or even a car showroom. They are round normally so the edge has been flattened with wear, try turning the o'ring so the round edge is on the outside and use Silicone grease on them to lubricate. If you...

The cylinders are not always a standard size but are normally 28mm if that is the case then it is as simple as you discribed. I cannot see in the picture as the emmersion electrical cover is in the way but have a look and see if there is a reducer to 22mm or a bush at the top of the cylinder.

You know what I would totally agree with what Richard is saying BUT! There is a but this pump is a weird one the jetforce models seem to out last all other pumps in durability, they are made by Stuart Turner for New Team and I have customers calling that have had them for 20 years + before...

The New team jetforce is a great pump from durability point of veiw but is is really noisy and as you say expensive, If you are prepared to repipe then do not use the duraspeed or any other NT product as none are continuously rated. Look at the rsp50 as a good quiet pump as long as you are...

I am compelled to respond..... :D Full time blogger for Salamander no! Rather than India I think you will find it is in Sunderland actually! Calling there main phone number and it is answered after a few rings! both Grundfoss and Techflow (owned by Stuart Turner) do have exactley the...

I have worked with Salamander pumps for years now, and it is a shame to hear some of the comments on this post, If any one suffers issues that are unresolved with there products then feel free to contact me and I will make sure that the outstanding issues are dealt with. With out knowing the...

If you have a look here here is all the replacement models currently available, http://www.new-team-pumps.co.uk/shower-pump-collection.html If you have one of the jetforce models then you are best to replace this like for like as the are configured with all the connections at one end, and you...

I think that you are slightly confused, Ignore heat dissapating just think of even temperature distribition. The idea of balancing is to ensure that you will have a restricted flow through the hottest radiator therefor allowing the c/h pump to be able to distribute the water to radiators that...

I have had this before (not being smelly) where the waste pipes fall is not that good you get a build up of skin,soap,pubes etc.. well because the shower waste is a shallow seal it can let some air back as the water is draining, cut a long story short, use D-block an acid based cleaner and I...

If they are perished then definitely replace them why not call the manufacturers as they have good customer service they might send you a pair in the post http://www.essexflanges.com/index.html

What about this one then http://shop.tapstore.com/wirquin-espace-connecting-tube-inc-extra-flat-bottle-trap.html

If the flange is fairly new i.e less than 5 years then you should be able to just tighten it, I would not have thought it would need new washers. if you need new washers go to decent plumbers merchant they should have some similar to the originals.

Be careful you could get salmon-ella from that :D

This is a cracking idea, is a waterless trap http://www.tapstore.com/acatalog/Senzo-Space-Saving-Trap.html it has a silicone section that forms the seal, have used them myself and they work very well. You can then connect your w/m using a spigot adaptor of some sorts.

Silcone grease is the only product to use on taps, couple of tips with crap taps, hot water temp has to be as low as poss as silicone grease will wash out after 65 degrees, if you have screw down taps when you take then apart undo the worm screw and clean by greasing then wipe clean again as...