Search results

Good advice, yes there is not much room in that situation, would you use something like 10mm soft copper?

Thanks for that, I had just only fitted it and just now had a horrible thought that it may only be suitable (size of bore) for a hob!

Hi, Could someone tell me if the new smaller type (named micro I think) bayonet cooker hose is suitable for a free standing cooker or designed for use with hob or similar with limited or lesser demand. Many thanks

HELP IV'E BEEN HIJACKED !!!

Basildon!

Flared?

Yes, this is square, just was not sure if it was half inch or bigger! approx 2 feet deep, would need a couple of extensions to use a socket set

Crutch head?

Thanks for that, I do recall that this is possible now, also would you happen to know the size of the square water board stopcock keys, is it half inch or three quarter, also if they are available to purchase and if so where? Thanks

Hi, Trying to find out approx when copper tube went metric, the reason for asking this, I have to change an original stopcock on a property and did not know if the soft copper main coming in leading up to the stopcock would be the old half inch or 15mm. The property is about the sixties...

Does this mean that the twisted pairs should be used together, for instance blue/white tracer to 5 connector and white/blue tracer 2 connector?

Brilliant and great advice, I will certainly now use the correct telephone cable!

Many thanks!

Hi Could anyone tell me if alarm cable is ok to run telephone sockets, to include broadband, the reason I ask is that I have plenty of alarm cable and seems pointless purchasing telephone cable if it does exactly the same job. Many thanks!

Thanks for the replies

Hi Does anyone know of any new washing machines that have hot and cold feeds, I seem to find that the hot feed has been done away with, why would this be? Our hot water and heating to our property is charged at a set rate (all gas used), it is not in our interest ton use electric to heat...

Hi Just wondering the process of emulsioning walls after stripping wallpaper off, the concern really is the residue of paste that may be left on the walls! Any guidance would be really appreciated. Many thanks!

I will try disconnecting main in and the heat exchanger from the water control and connect the main in direct to the heat exchanger to see what flow I can get at the hot tap, if slow then it must be within the heat exchanger. if not, may be the control valve, diaphram etc. Any idea where I...

Hi, if anyone is familiar with this propane water heater I would appreciate any help that can be given, Plenty of water volume and pressure going into heater but no more than a very slow output, not even enough for the heater to ignite, does not seem to be the water control as I have had...

I think that is the direction to go in, just did not want to break the soldered joint (pretty rigid)