Search results

For anyone who needs the correct size or a longer hose : 10mm

Can anyone tell me what hose I need to be able to connect to the vent of the heat exchanger to bleed the air . Will a garden hose fit this vent? Or do I need a smaller size. I only need a couple of metres. Should have been left but previous owner must have taken it. Pete

We had a leak back in Feb. Also with TW. Does any tap hiss when used…air escaping, more noticeable first thing after no usage at night. There is a chance that air from a reconnection upstream vented via your meter/property. Was able to look under our floor …all dry Was going to knockout an air...

I put it out there, Have you checked that both valves on these rads are open ( balance on each )I say this as you said New TRVs fitted, could be the installer did not open these two..

Worth checking the F&E tank level/ check for over pumping/ feed is not blocked.

Yes plenty of hot water on tap with its inbuilt hot cylinder. Told it’s easy to service as it well designed.

Ours is 4bed, 2.5 bath and the boiler as per dormermike suggestion.

Thanks Bonni & crank, very much appreciated

We are thinking of having a new composite door supplied and fitted by Value doors. We don’t have any knowledge of the types of construction and what we should expect and lookout for except to say this door has a wooden infill. Any thoughts or suggestions would be very welcome and much appreciated.

Well my idea of a quick look is shelved. I take on board all the comments and I value my back over my inquisitive nature. It’s not a problem and hope I never need to have it lifted. Thanks for all the info. Pete

You make a good point John , think best left and lifted as and when

Thanks John, we just moved in and thought I would ask the question. Now having had a quick Google , I can see that it has inbuilt lift handles. Probably have a go at removing it to look this week .

Is this a cable pit cover?

I’ve just been down this same road with Thames Water. Call and ask for someone to come and check your meter. Also, get a customer contact number from the call. You will need to be able to shut your stopcock during the investigation. If the meter is ok but still shows a flow when you turn the...

Screwfix have this unit, part number 1436f. We have one fitted on our boiler, not fitted by us, was there when we bought the house. The reviews are mixed but I can say our hot taps & shower heads are clear of limescale. I will probably renew at sometime as its will be like 4 like. We live in...

The above shows the 3 controls. Use the Tap controller to adjust the hot water temp

Google your Wilo gold rs60, you will find information regarding

One more thing I should have said, run a magnet down the fill/expansion pipe at the tee connection as an extra check for possible blockage down from the F&E tank just in case your pump / system is short of water, don’t think it should be but it takes only a couple of mins so worth doing. Good luck