Search results

Thank you, John, for those tips. Alas ! There is *nowhere* that I can install isolating valves where they would be accessible ! The pipes are all under the floor, with two joists between their current run and the wall - and not enough room between the last joist and the wall to fit the pipes...

I want to install a shower in the corner of the room, against a brick outside wall and an internal brick wall. I want to mount the mixer control on the internal wall. I guess I have to cut chases in the brickwork for the pipes. How deep should they be? Should I wrap the pipes in Densotape, or...

1200 x 800 quadrant tray, with an 800 x 800 quadrant door set on top. But how to fill the gap ?

Ooppss ! The ceiling slopes in one direction, so I shall have to put in some sort of a return wall, say 400 long, and then use an 800 x 1200 tray with an 800 x 800 door (side entry) and end panel. Hmmm... I guess this return wall will have to rest on the tray ? Or do I put it down to...

Are they something else again ?

Hi ! If you are American, then Happy Good Riddance Day to you ! I want to install a shower cubicle in the corner of the room, where both walls are plastered brick. Obviously(?) the plumbing has to go on one of these walls. How do I hide the pipework ? I really don't want to chase the...

OK, so this is old... I had exactly the same problem (in a flat I wanted to rent out), and I sent the tray back. The replacement was not quite so bad, so I accepted it. It still delayed things so I lost two month's rent...

OK, so this is old... I had exactly the same problem (in a flat I wanted to rent out), and I sent the tray back. The replacement was not quite so bad, so I accepted it. It still delayed things so I lost two month's rent...

When we bought this house, there was a Sky dish on the South chimney, the lead from which went into the dining room (ground floor, south). On the North chimney is a TV aerial and (what I think is) an FM aerial. The cable from the TV aerial comes into the loft, where there used to be a...

... but my HAT, it's wide !

Erm... moving swiftly on from Sky... I have a Panasonic "DMR EX95V" HD / DVD / Video-tape recorder, but the DVD writer function has packed up (yet again). If I take the HD out, is there software around that I can install to enable me to record that recorded stuff onto DVD ?

OK, so this Topic has been dormant for 11 months, but here's a bit that might help. First off - CRUCIAL ! - "Alterations" are zero-rated for VAT - but in the last budget this is to end on 1st October, so p u l l y o u r f i n g e r o u t ! ! ! 2nd, see the scary cautionary tale...

That's not very polite. Nor is your post relevant to the topic. Take your own advice.

That's not very polite. Nor is your post relevant to the topic. Take your own advice.

That's not very polite. Nor is your post relevant to the topic. Take your own advice.

That's not very polite. Nor is your post relevant to the topic. Take your own advice.

Five words rather than one ? You understood. Your post is not relevant to the topic.

I wish I were... :wink: Not sure why you had to quote my message in full, though. Are you drunk ?

Just f.y.i. Jono1uk wrote (above), on Mon Jul 19, 2010 3:40 pm "Here is my LA's site" That link no longer works. It seems to be the case that nowhere now puts applications on-line for others to crib from.

Probably. And pangs of conscience, dear boy ;-)