Search results

  1. T

    Philips 14PV200/07 saying N. ACT

    Have you set the internal date and clock in the clock set of the instal menu
  2. T

    good antivirus

    F secure its the bees knees
  3. T

    CD player

    I doubt very much whether you are going to be able to aquire a spare for your cd. Quite some years ago I worked for a service centre doing third party under warranty repairs for one of the largest retailers in this country and nothing came back to our service centre if it had a retail value of...
  4. T

    Bra Wire

    second option tip machine back make sure its well supported unclip large sump hose from bottom of tub very likely you will see the wire at the drum opening good pair of pliers grip and pull out.
  5. T

    hOTPOINT wma30

    White goods techs do not usually fault find and repair down to component level therefore You may have a problem finding a circuit diagram for this. It looks to be judging by the position of this resistor which is next to the mains input that it is probably a current surge resistor which may be a...
  6. T

    Hotpoint WMA34

    Thanx for your feedback jenx most people that post dont bother
  7. T

    Hotpoint WMA34

    couple of possibilities 1. Bra wire has found its way and lodged itself between inner tub and outer drum. Tangles itself in the heater element and scrapes bottom of tub as it rotates May only be apparent on fast rotation of the drum. 2. Motor bearings drying out and screeching.
  8. T

    Ok Daveed first of all it is better to air your problem in the open appliance forum were you...

    Ok Daveed first of all it is better to air your problem in the open appliance forum were you would get a bigger response from your posting having said that now you are more precise with the symptom the most probable cause is that the heater is open circuit as the next stage in your machine,s...
  9. T

    How to fit drive belt

    Eh! how come me and google have never heard of this animal or is this you LOLing softus
  10. T

    How to fit drive belt

    Condenser drier with a big pulley which make/model have you been fitting belts to softus. Sorry fr not a simple job and usually a reason why belt snaps.Check if drum is rotating freely Check the jockey wheels are turning freely these are the wheels the drum sits on and turns the drum rotates.
  11. T

    Hotpoint Tumble Drier belt replacement.

    There is no short cut for the diy'er with this repair for white goods techs hotpoint supply a leverage tool made specially made for this repair so unless you have access to one I'm afraid its just brute force
  12. T

    Hi Daveed The symptoms you describe are a bit ambiguous however if you mean the programme stops...

    Hi Daveed The symptoms you describe are a bit ambiguous however if you mean the programme stops midway through cycle (usually on the start of rinse part of programme ) and it is a machine with a top mounted motor then it is probably motor brushes which are not too difficult to fit.They can be...
  13. T

    Washing machine - not filling with hot water

    This is quite a common problem with some machines and combi boilers it is caused by the back pressure resistance on some washing machine inlet valves not triggering the diaphragm in the boilers divertor valve system.However I would not worry too much about it as the thinking is now that is more...
  14. T

    Worcester Greenstar 30CDI - Timing does not work

    I surrender this only worked on the "on" part of the programme as soon as it switched on, the advance led lit and stayed lit and as I mentioned before when the led is lit it overides the programme settings.I will just have to get out of bed an hour before her indoors to manually switch it on so...
  15. T

    Worcester Greenstar 30CDI - Timing does not work

    Had another look yesterday and I may have made a error in setting. After setting clock and setting programmes and the turning to come and go off "once" a day, because the advance button is not mentioned at all in my manual I assumed the timer is live when the red led is lit.I now think it is...
  16. T

    Worcester Greenstar 30CDI - Timing does not work

    coincidently I have a 24cdi which I have had for six years and for the first time a week ago tried to set the timer to come on/off once a day I am sure I am setting it correctly but it does not work.
  17. T

    BEKO tv 284239NS problem with remote sensor

    The only other thing is that there is usually a manual button on the front of the tv which selects av. It is not always marked av but may be a symbol instead.If there is not there is usually a manual button on the tv marked programme + and- if the - button is pressed repeatedly it can drop into...
  18. T

    BEKO tv 284239NS problem with remote sensor

    The component you refer to is the infra red pre amp sensor which is the component which recieves the infra red beam from the remote control and amplifies the signal to the point where the tv can process it.You can identify the component as it is directly behind the small glss window on the...
  19. T

    Samsung cinema system sound problems HELP!

    have you connected the audio on phono to phono from the sky box to the cinema system and enabled aux in 2 on the cinema system to stereo as opposed to 5.1
  20. T

    Red flashing light on a Philips 29PT9413/05

    The line output transformer is a poss but while your in there on the front of the line transformer there are two adusters may be just a plstic screw slots one will be marked focus the other marked poss A1 this one just back off anticlockwise just a degree or two and try.
Back
Top