Search results

Thanks TTC, it makes sense now. Looks to me like I have 2 options with HW 1. I take the output from the neostat @ (linked) 230V directly to the DHW valve or 2. I take the output using the voltfree (unlinked) to B1 and B2 on the UH1 (diagram attached in UH1 Album). Is that correct...

Hi Guys, Firstly I hope I have this question in the correct forum (electrics not heating). I have some confusion over the use of a neoSta-hw which states on the back input 85-230V, output volt free change over switch 230V-3A Max. I have a 12V UH1 controler and 7 neoStat 12Vs. The wiring of the...

Thanks Guys - all sorted on that part now. Your help is valued and your information is accurate - brilliant. I'll now move forward to the next problem I'm sure - Keep your eye on me fella's :lol:

Oh Dear - Humble pie for me, the manual is correct - I misread off and on (an arrow would have helped rather than just a table) :| Same question applies on ENG or 001 if you have the patinec to help - thanks

Guys - Thanks for your help and patience with this. I think it is now sorted. I reset the dips, would you believe the manual has the illustrations of the dip switches the wrong way round. i.e it says down is off when it is really on - this now stacks up with the display advise for the RKPs...

Sorry secureiam - being a bit thick. I have accessed yes and menu on both keypads: the one with dips set as eng is ADD001 but the other is ADD008? cant see how to change it

Still same problem. For background info I have this set up on a bench with laptop connected using wintex, idea being I'll get it sorted with a dry run, connect up to the pre-installed cables (that I have run and mrked) in the house and Bobs your uncle - hmmm well that's the plan. I have...

Hi again Sparkymarka. I did have the dip switches set differently than for RKP1 (which is all down - on) but didn't realise until you advised it had to the dips for RKP2. I have done this (of on off off - up down up up) cold booted reset etc. When I get to confirm I only see NET RKP > 1... 1...

Hi, Can anybody advise please? When I added another RKP, restarted the system, uploaded the wintex, confirmed devices from the engineer keypad. Confirmed devices, yes yes. When going to the "view RKP Status" it shows N1,R2 #NOT FITTED#. Looking at the wiring diagram in the manual and I'm...

Thanks Scott. Just googled the Texecom Vipers - look just the ticket, I can use the GlXs elswhere - result! I have a step difference from door to frame of about 6mm, will they handle that? do they come with packers/spacers? Can they be used in any plain - vertical or horizontal? For the...

You Superstar sparkymarka. Sorted -thank you. Happy New Year to you :D

Thanks again. Last question on this as I'm using your time up here but i do appreciate your info. I have 3 of the GLX already purchased. Is there a way of using them as Viper only i.e not putting up the mag side of the kit?

I have currently wired the panel with the Outside Bell Box coming off the bell outputs on the board. I have the internal Picollo coming from -OP1 and to +12V. Everything is fine but on alarm they both sound at the same time. I would prefer to have only the internal on first. Is there a way...

Thanks sparkymarka, I was begining to wonder, I did see a thread about 12 months ago ( http://www.diynot.com/forums/alarms-cctv-telephones/viper-glx-first-to-alarm-option.304433/ ) where somebody was trying to do a similar thing but nobody gave any specifics on the wiring although the asker did...

I wonder if you chaps could help - it would be awfully good of you..... I'm struggling with subject wiring. I have 3 sets of bi-folders on the rear of the house, I want use Viper GLX ( duel viper and contact) on all of them linked up on 2 independent zones; 1 for magnetic contact and the...