Search results

Building an extension, roughly 6m x 5m. What are the opinions of setting a level gutter as opposed to having a slope. I am considering a level gutter for looks really but wondering if that would lead to any problems. If a slope has to be built in is the correct fall 1 in 600? Thanks.

How much is it out by ?

Have a look here.. http://www.aqualisa.co.uk/upload/INSTALLATION%20GUIDES/Install_ShowerKits.pdf Andy

Maybe there is a submarine under there. Do you know the history of what was there?

How about a couple of scaffold planks one either side of the valley.

Salad for your tea tonight me thinks. Dont eat that organic cucumber from Germany though. :D When you feel the tiles pop under your feet, does that mean that that one needs replacing? Andy.

http://www.tameside.gov.uk/buildingcontrol/guidancenotes/note7.pdf Maybe you have answered your own question with the calculation you have done. What is the notch for? Andy.

Sandtoft Calderdale single lap interlocking flat profile concrete tiles. Building an extension and fitting above tiles. I have got 4 hips, 3 valleys and an 'S' shaped ridge to now sort out. I have got good scaffolding with the eaves about waist height. My question is do these type of tiles...

I believe 150mm is the minimum thickness. So min 150 below drain and lintel above.

Foam is a bit of a bodge. Use slate jammed nice and tight and a bit of mortar. Andy.

Just fitted some to my extension and I overlapped by 100mm. Best advice is to follow the manufacturers instructions. I have seen instructions which say overlap and others say butt up. As I see it, partly why they are used is to keep the underlay out of the gutter, so if they were butted...

Have a look here.... http://www.unitedutilities.com/Documents/1344_How_20to_20lay_20new_20pipe.pdf Andy.

Have you been accepted onto the lead pipe replacement scheme. If so you should have received details of how to run your new supply pipe. Your new supply will have to be inspected unless you use a wiaps plumber who can self certify. 25mm is the norm. your pipe will need to be sleeved and...

Combi :?:

Need a bit more info. Do you mean the copper is used actually underground or under your floorboards? Andy.

Don't get hung up on the 15mm gas valve. If the appliance needs a bigger diameter supply, that's what it needs, it gets reduced just before the inlet. The manufacturers don't supply a choice of different size valves. Andy.

What is the boiler wired into?

http://www.screwfix.com/p/flexible-adaptor/19914 Andy.

Here you go... http://www.unitedutilities.com/Documents/1344_How_20to_20lay_20new_20pipe.pdf Andy.

These are the ones... http://www.strongtie.co.uk/pdf/HSA.pdf Andy