Search results

should the fan spin like a bicycle wheel.....one push and it goes for a little while?

Thanks Mark_FixCookers for all the advice. The fan was behaving oddly but then I don't know what it does normally. It does turn but quite slowly, I'm guessing here but lets say between 1 and 2 revolutions a second. I messed around with the oven settings and one time it went really fast like you...

Hi we have a Cannon C60etc free standing electric cooker and the oven is behaving a little bit erratically, ie you set it to 200 and it will beep and say its hot enough at 160 and variations on that theme. The way I check what its at when it beeps and says its reached temperature, ie you can...

Hi any Hobart Dishwasher experts about? My wife works as the head Caterer in a primary school and they have contractors to repair their kitchen stuff, that she has to call but they are not that helpful and take ages to come out. They don’t seem that knowledgeable either as they just seem to keep...

Hi I have a MK Masterseal socket outside and one side has gone dead. I plugged a Martindale in and its dead whereas the other side works perfectly. It is a switched one but playing with the switch achieves nothing. Typical of all the sockets it is an awkward one to work on tucked within an...

Hi I have a Miele dishwasher and the float switch in the base activated due to a leak. Its model G 656 SC PLUS. I took the right hand side off I have found the cause, I think. There is this big tank on the right hand side with a solenoid on it half way up. Looking online at the guts of this...

It didnt seem to need formatting so I did not format it but its not 32 its NTFS. It selected that when I set it up to be recognised, ie when you first get it and plug it in the PC doesnt see it until you do something in Disk Managment, have I mucked up there somewhere? It is in there as...

Hi I am having problems backing up to my new Samsung 500GB SSD drive. I am using it externally on a USB3 lead with the drive being inside a dedicated SSD drive case. It works fine to access but backing up seems to lock up after a few seconds if I select anything bigger than small files. It will...

Cheers woody will do. I will do some research on paint on membranes too to see if there is any particularly good one that lasts a long time. As a side thing can you tell from this picture what these tiles are made of? 20170625_152632 by happyhero posted 3 Jul 2017 at 3:03 PM

Cheers woody, few questions though as I am not a professional roofer, will it be ok nailing through the felt long term? would you advise any particular felt for my particular method as its tiles over felt? Maybe a felt of higher quality that would last much longer (hoping to never have to do...

I have to keep the same pitch so what can I cover the timber roof in to waterproof it FULLY but still fit battens to it, so that if any water does get past the tiles it will simply still run off what ever is covering the timber?

Hi everybody I need some advice and guidance, I’ve mucked up a few years back and now I am sort of having to resolve the problem I’ve created. I either must have done the job well first time or more likely the materials I used saved me for this long, what I am talking about is the shallow...

roof repair/replacement