Search results

Link to a break tank?

When you say reach inside the toilet bowl, it's not an integrated toilet bidet spray. It's one of those handle ones.

I have to kit out a disabled bathroom with a Doc M type setup. If we want to fit a douche shower/toilet spray (circa. cost £25) but we want warm water rather than the mains cold, together with other requirements to have a single lever basin tap, is it best to have an independent thermostatic...

What is the best way to protect a double front door with side glass whilst building work progresses? The opening is about 2.5m. I was thinking some industrial type bubble wrap but not sure of the best way to tape this all together and if will come apart.

When did the rules change such that you can now pump the mains? What is normal natural gravity flow rate when coming off a 22mm mains say for London or Herts?

https://www.tradingdepot.co.uk/homeboost-1-6-bar-mains-water-pump I thought you cannot fit a pump on the incoming mains?

Doorstops? You mean the mechanical door closer or those rubber mouse looking door stop? So If I am getting my linings machined out because we have bespoke sizes, what should the strip out size be, 10mm? Do you have an image of the plain white one you refer to as the ones I have seen a pretty...

Also the fact that very few places sell FD20 doors anymore so indirectly they suggest FD30 instead. I am going to be putting in FD30 doors for most of the house (I have 20+ doors in the house to do). That being the case, if my inspector is not requiring me to put in the intumescent strips...

You had to change all the first and second-floor door frames??! That must have been a big and costly job. I presume then you also have FD30 doors also installed?

My private building regs inspector (when analysing my architect's plans for the existing major renovation of our house), told him that it was not necessary to have intumescent strip on every door in the house esp the first and second floor bedroom landing but that it would be needed between the...

So would min 30mm thick qualify together with tuplip or other softwood? Why does it need to be hardwood?

What makes a door lining / casing, a fire lining compared with a non fire lining casing?

I need to replace the old Sirrus thermostatic shower valve which we had fitted in 1993. The problem is the temperature dial is very loose and I have had the mixing cartridge so many times at £90 a go and my elderly parents complaining it's too hot, I want to change the whole shower valve. How...

Hi Looking at the spec, it seems to be used to waterproof walls/plasterboard, not for a wet room floor to use on concrete? Am I mistaken? Normally those floor tanking kit (cloth type material) is around £400 I think?

Hi Does anyone have any suggestions for an affordable tanking kit for a wet room / disabled bathroom of about 4m2?

That is a good point, I never thought of it that way. I suppose he was incorporating the fact that the garage is not heated and will be more cold with a wider opening and not be as insulated as the front of the house/door.

Im not sure what part is not clear. The question is "Is it ok to install an internal 44mm FD30 door between a room in the house and the garage" or is it advisable to use external doors because of the fact that the main garage door opening and closing could result in moisture ruining the door.

Is it ok/inadvisable to install a pair of FD30 internal doors between an internal garage and playroom due to moisture etc? I've had one door shop saying the door will ruin in 6 months but other door shops saying it will be fine because it is sheltered despite the garage door being opened one or...

anyone?

Is it ok to use an a double door set (internal FD30 door) between an internal garage and a playroom? One door shop said I should use external doors because of moisture etc and the door won't last more than six months. Other shops said it'll be fine. We plan to use the garage for our car so...