Search results

Hi The end bit of the mixer tap has just fell off. I'm struggling to get in back on correctly. Does the threaded bit go in first or the plastic bit? Is it knackered once it falls out?

Taylor Woodrow for you. Don't even get me started on the plumbing! Thanks for links.

Thanks. Got a few to replace so was trying to save!

Hi. Does anyone know if you can replace the lock cover on a upvc window handle. I believe they are the espag type, but the plastic around the actual keyhole has crumbled off on a few of them. Windows are 8 hrs old in a new build. Thanks.

hi. Seem to have no pressure in the cold water on the bath. Everything else is fine in other bathrooms. Any ideas? Thanks

Hi. I have a stainless sink with another small sink next to it. The smaller sink has an overflow into the main sink, it's a plastic bendy pipe. I noticed a bad smell coming from sink, and realised this pipe was full of gunk. In my wisdom, I removed the pipe and cleaned it out. I now have a...

White plastic type stuff, assuming it's silicon.

Hi Plumber has adjusted shower tray, said we might need to reseal it. Can anyone talk me through it? Ta[/b]

Hi. One of my toilets has continual drip onto the pan, so the cistern keeps dropping too low. I had noticed that when it flushes it was swirling around the pan, not on the usual way. Is this a minor problem or do I need o lovely plumber to sort it? House is 6 years old. Cheers

Just found the bottom oven on my Bosch double built in is not working. Top oven/grill is ok. Any ideas? Thanks

Hi. Can someone tell me what the concrete edging is at the edge of my roof tiles. it is crumbling in some places and bits have fell off, including one rather large brick size piece. The house is only six years old and it looks very unsightly.

have taken off the shower head and bendy pipe and the bit of pipe that sticks out of the wall has a dribble of water coming out of it. Does this mean that I have to replace the whole shower cartridge? its about 6 years old. We recently had a pump fitted to increase pressure in the shower and...

salamander type ESP50CPV

Hi. Have just had a salamander shower pump fitted in airing cupboard to feed two ensuite showers. Have noticed that about twice a day the pump appears to turn on for a couple of seconds and then stops (when no shower is being used). Is this normal?

The boiler is a potterton promax, pump is wilo gold 80, valves are drayton x2 and a honeywell for the hot water (replaced a previous drayton). Immersion is not switched on. Have been told by an engineer that the pipework seems wrong for the system - there is a pipe leading back to the bottom...

Hi all Still having problems with scalding hot water. Have had thermostat on tank changed, 3 port valve changed. still no result and getting desperate. Does the boiler have a thermostat inside? Could it be the boiler at fault?.

no sorry. but if you could give advice then I could pass on to plumber friend who might be able to help.