Search results

Port valve.

Could be pump cavitation if it is face down, if you know the make of pump it will show how the pump should be fitted and I believe if it's face down for long enough then the pump will be strained and work harder then gurgling could be because the pump stalls then ramps back up, be good to know...

Gurgling noises can be down to bad design say if the pump is set to max and the trv on low this can restrict the flow and cause the boiler to heat the water to quick resulting in a gurgle sound like when a kettle boils and it rumbles, usually a auto bypass on the system or a modulating pump can...

One for you have you aired the magnaleak? Also why is it on the flow??

Hi all I have been offered to have solar pv on my roof for what they say is free, this is a sales word as nothing is free. I would like to know the ins and outs on haveing it fitted and leasing my roof for 25 years, is it worth it? Will it be hard to sell with the panels? Whats the catch? Cheers.

I would save for now and replace when dead to be honest, old units are less carbon friendly yes but parts are peanuts compared to modern boilers look up parts on the net for Worcester and you will near keel over, what you save on gas minimal to parts you will need in say five years time, keep it...

Feel for you then but as I say if you can get by then good on you. Didn't want to seem above myself but I would charge more but depends on lots of aspects I suppose, I work in the Hampshire area and charge good money and have little overheads but then I only get called never chase and have a big...

Is there anything wrong with the old unit? Or is it just old? If it's not broke and all, but the quote is high but bg have bigger over heads than local rgi's so is a set charge I would go with the above a get other quotes we can't see the install so could be a pig, but then it could be a tidy...

No don't need to work in London xr 4x4 just need to value yourself better, £100 a day is shamefully cheap is that with a garentee and insurance? After tax, public liability, diesel and tools works out at about £60 a day. Just my opinion though if your happy with that carry on.

Delta t2 yep b and q, Joe it was a typo it was suppose to be hit and miss. Glad it went ok that's fine with the name better than Gordon.

Appologies mod 10 will do in future just a bit sad that some people have to spoil thanks for the heads up.

Can the mods on this site clear the people/person, that keeps posting pap up for us lot to sort through? There maybe someone who really needs help rather than someone having fun on their computer winding people up trying to help. If not I hope all the genuine people helping others boycott the...

Hello jobyjo84 ask the same yesterday really get a life this is on page two of the forum. I am looking into getting my old ugly gas fire and surround removed and using the extra wall and floor space for another sofa. however it has a back boiler which would need to be blocked in to allow...

You are a lucky man the door seal if the old type can write off boilers in not changed just shows servicing is a must, and if serviced should of been changed donkeys ago. Glad you found the problem

It's hit and miss with the blocks you are on about they are fitted so the baths can be stacked in to each other, I have bopped them off loads of times with a rubber mallet never had a problem as they are glued on th the fiberglass, if it's a 3mm bath leave them if it's a 5mm bath give them a...

I take it is a combi due to the fact of the exchanger being replaced and also assume it was the secondary plate to plate exchanger, if not with some of the parts changed you should of scrapped the unit. The diag above is more what I would of gone with in the beginning but then again who at...

Na I'm ok don't think your my type. Cheers for the offer though.

Yes Joe I am are you really gi Joe?

Gas safe do spot checks and contact customers direct with out consent from the engineer. We also have a certificate of competence renewed every 5 years un-like builders that are mostly glorified chippys anyway that have been taught not trained at any college and if they have a certificate that's...

Get your installer to call vaillant and ask them how to remove copper sulphate from the valve. Should work after that call and a little work. 8)